Achieving performance and longevity with butane-operated low-temperature solid oxide fuel cells using low-cost Cu and CeO<sub>2</sub> catalysts
نویسندگان
چکیده
Record high performance and longevity is reported for a butane-fueled low-temperature-operating solid oxide fuel cell (LT-SOFC). Affordable catalysts, Cu CeO 2 , were incorporated into thin-film-based SOFC to enable this remarkable enhancement.
منابع مشابه
Chemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell
A set of multicomponent perovskite oxide nanoparticles based on La1-xSrxCo1-yFeyO3-δ(LSCF) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (LT-SOFC) as cathode materials. The precursor materials used in this synthesis were lanthanum nitrate hexahydrate [La(NO3)<su...
متن کاملChemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell
A set of multicomponent perovskite oxide nanoparticles based on La1-xSrxCo1-yFeyO3-δ(LSCF) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (LT-SOFC) as cathode materials. The precursor materials used in this synthesis were lanthanum nitrate hexahydrate [La(NO3)<su...
متن کاملStudy on Zinc Oxide-Based Electrolytes in Low-Temperature Solid Oxide Fuel Cells
Semiconducting-ionic conductors have been recently described as excellent electrolyte membranes for low-temperature operation solid oxide fuel cells (LT-SOFCs). In the present work, two new functional materials based on zinc oxide (ZnO)-a legacy material in semiconductors but exceptionally novel to solid state ionics-are developed as membranes in SOFCs for the first time. The proposed ZnO and Z...
متن کاملLow-Temperature Fabrication of Oxide Composites for Solid-Oxide Fuel Cells
Composites of yttria-stabilized zirconia (YSZ) with Sr-doped LaCrO3 (LSC) and Sr-doped LaMnO3 (LSM) were prepared by impregnation of a porous YSZ matrix with aqueous solutions of the appropriate metal salts, followed by sintering to various temperatures. XRD measurements showed that perovskite phases formed after sintering at 1073 K, a temperature well below that at which solid-state reactions ...
متن کاملMultilayered YSZ/GZO films with greatly enhanced ionic conduction for low temperature solid oxide fuel cells.
Strain confinement in heterostructured films significantly affects ionic conductivity of the electrolytes for solid oxide fuel cells based on a multi-layered design strategy. Nearly ideal tensile strain can be achieved by a dedicated manipulation of the lattice mismatch between adjacent layers and fine control of the layer thicknesses to minimize the formation of dislocations and thus to achiev...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of materials chemistry. A, Materials for energy and sustainability
سال: 2022
ISSN: ['2050-7488', '2050-7496']
DOI: https://doi.org/10.1039/d1ta06922e