Achieving Fully Blade-Coated Ambient-Processed Perovskite Solar Cells by Controlling the Blade-Coater Temperature
نویسندگان
چکیده
منابع مشابه
Highly efficient inverted rapid-drying blade-coated organic solar cells
23 24 25 26 27 28 29 30 31 32 Article history: Received 27 September 2011 Received in revised form 27 November 2011 Accepted 31 December 2011 Available online xxxx
متن کاملPolymer solar cell by blade coating
Polymer bulk hetero-junction solar cells of poly(3-hexylthiophene) (P3HT) donor and (6,6)-phenyl-C61-butyric acid methyl ester (PCBM) acceptor are fabricated by blade coating in toluene solution. Desired donor–acceptor self-organization is achieved without the slow drying process and high boiling point solvent. Power conversion efficiency is 3.8%, much higher than the 2.6% obtained by spin coat...
متن کاملEfficient perovskite solar cells based on low-temperature solution-processed (CH3NH3)PbI3 perovskite/CuInS2 planar heterojunctions
In this work, the solution-processed CH3NH3PbI3 perovskite/copper indium disulfide (CuInS2) planar heterojunction solar cells with Al2O3 as a scaffold were fabricated at a temperature as low as 250°C for the first time, in which the indium tin oxide (ITO)-coated glass instead of the fluorine-doped tin oxide (FTO)-coated glass was used as the light-incidence electrode and the solution-processed ...
متن کاملHigh performance organic photovoltaic cells with blade-coated active layers
High performance bulk heterojunction organic photovoltaic (OPV) cells with blade-coated active layers of POD2T-DTBT blended with [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) are demonstrated in this work. The blade-coated cells exhibit power conversion efficiencies of up to 6.74%, which is comparable to those of conventional spincoated cells but obtained with just a fraction of the mater...
متن کاملFully solution-processed transparent electrodes based on silver nanowire composites for perovskite solar cells.
We report all-solution-processed transparent conductive electrodes based on Ag nanowire (AgNW)-embedded metal oxide composite films for application in organometal halide perovskite solar cells. To address the thermal instability of Ag nanowires, we used combustive sol-gel derived thin films to construct ZnO/ITO/AgNW/ITO composite structures. The resulting composite configuration effectively pre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Journal of Photovoltaics
سال: 2018
ISSN: 2156-3381,2156-3403
DOI: 10.1109/jphotov.2018.2861752