Acetylene pyrolysis in a jet-stirred-reactor for low pressure gas carburizing process – Experiments, kinetic modeling and mixing intensity investigations by CFD simulation
نویسندگان
چکیده
منابع مشابه
Modeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor.
In the present work, the pyrolysis of acetylene was studied under steel vacuum carburizing conditions in a tubular flow reactor. The pyrolysis temperature ranged from 650 degrees C to 1050 degrees C. The partial pressure of acetylene in the feed mixture was 10 and 20 mbar, respectively, while the rest of the mixture consisted of nitrogen. The total pressure of the mixture was 1.6 bar. A kinetic...
متن کاملCFD Modeling of Gas-Liquid Hydrodynamics in a Stirred Tank Reactor
Multiphase impeller stirred tank reactors enhance mixing of reacting species used in a variety of chemical industries. These reactors have been studied based on Computational Fluid Dynamics (CFD) that can be used in the analysis, design and scale up of these reactors. Most of the researches done in this area are limited to single phase reactors, and a few remaining two phase flow investigat...
متن کاملEstimation of pyrolysis product of LDPE degradation using different process parameters in a stirred reactor
Pyrolysis of low density polyethylene (LDPE) by equilibrium fluid catalytic cracking (FCC) was studied in a stirred reactor under different process parameters. In this work, the effect of process parameters such as degradation temperature (420-510°C), catalyst/polymer ratio (0-60%), carrier gas type (H2, N2, ethylene, propylene, Ar and He), residence time and agitator speed (0-300 rpm) on the c...
متن کاملcfd modeling of gas-liquid hydrodynamics in a stirred tank reactor
multiphase impeller stirred tank reactors enhance mixing of reacting species used in a variety of chemical industries. these reactors have been studied based on computational fluid dynamics (cfd) that can be used in the analysis, design and scale up of these reactors. most of the researches done in this area are limited to single phase reactors, and a few remaining two phase flow investigations...
متن کاملModeling and Simulation of Non Linear Process Control Reactor - Continuous Stirred Tank Reactor
Chemical reactors are the most influential and therefore important units that a chemical engineer will encounter. To ensure the successful operation of a Continuous Stirred Tank Reactor (CSTR) it is necessary to understand their dynamic characteristics. A good understanding will ultimately enable effective control systems design. The aim of this paper is to introduce some basic concepts of chem...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical Engineering Science
سال: 2019
ISSN: 0009-2509
DOI: 10.1016/j.ces.2018.10.028