AC/DC current ratio in a current superimposition variable flux reluctance machine

A Current-Based Output Feedback Sliding Mode Control for Speed Sensorless Induction Machine Drive Using Adaptive Sliding Mode Flux Observer

This paper presents a new adaptive Sliding-Mode flux observer for speed sensorless and rotor flux control of three-phase induction motor (IM) drives. The motor drive is supplied by a three-level space vector modulation (SVM) inverter. Considering the three-phase IM Equations in a stator stationary two axis reference frame, using the partial feedback linearization control and Sliding-Mode (SM) c...

Influence of magnet eddy current on magnetization characteristics of variable flux memory machine

Novel Direct Flux and Torque Control of Optimally Designed 6 Phase Reluctance Machine with Special Current Waveform

In this paper the principle, basic torque theory and design optimisation of a six-phase reluctance dc machine are considered. A trapezoidal phase current waveform for the machine drive is proposed and evaluated to minimise ripple torque. Low cost normal laminated salient-pole rotors with and without slits and chamfered poles are investigated. The six-phase machine is optimised in multi-dimensio...

A New Method of Current Density Distribution for Switched Reluctance Machine to Increase Average output Torque

The electromagnetic performances for two current distribution methods (classical and non-classical) of a 3-phase, 24 stator slots and 16 rotor poles Switching Reluctance Machine (SRM) were compared. The three phases were excited in sinusoidal current mode. The Finite Element Model was used to predict the average torque, the total flux of each phase, the torque ripple, the self and the mutual-in...

Linear Transverse Flux Reluctance Machine with Permanent Magnets

A new structure of linear transverse flux machine (TFM) is presented in this paper. It is in fact a variable reluctance linear machine having permanent magnets on the mover. Its structure and its working principle will be discussed. After a preliminary design of the motor a 3D FEM analysis was carried out before optimizing the designed linear motor. The flux densities in the machine and the sta...