Accelerated Stage Creep and Creep Rupture under Temperature Cycling

Creep and Creep–Rupture Behavior of Wood-Based Structural Panels

This paper summarizes a cooperative research program between the USDA Forest Service, Forest Products Laboratory (FPL), in Madison, Wisconsin, and Forintek Canada Corp. in Vancouver, British Columbia, Canada. This research program provided detailed creep–rupture and some creep information for composite panel products. Commercially produced plywood, oriented strandboard (OSB), and minimally alig...

Creep rupture of viscoelastic fiber bundles.

We study the creep rupture of bundles of viscoelastic fibers occurring under uniaxial constant tensile loading. A fiber bundle model is introduced that combines the viscoelastic constitutive behavior and the strain controlled breaking of fibers. Analytical and numerical calculations showed that above a critical external load the deformation of the system monotonically increases in time resultin...

Creep rupture of wallaby tail tendons.

The tail tendons from wallabies (Macropus rufogriseus) suffer creep rupture at stresses of 10 MPa or above, whereas their yield stress in a dynamic test is about 144 MPa. At stresses between 20 and 80 MPa, the time-to-rupture decreases exponentially with stress, but at 10 MPa, the lifetime is well above this exponential. For comparison, the stress on a wallaby tail tendon, when its muscle contr...

Mechanical models of the effect of grain boundary sliding on creep and creep rupture

Combined Multiscale Creep Strain and Creep Rupture Modeling for Composite Materials

In this study, a novel multiscale combined creep strain and creep rupture model is proposed. By comparing to experimental data it was shown that the model provides accurate creep rupture predictions for unidirectional off-axis specimens. The creep strain model provides accurate predictions within the confines of the linear elastic restrictions used in its development. This creep strain and cree...