AC Magnetic Suspension Using a Differential Feedback Power Amplifier
نویسندگان
چکیده
منابع مشابه
Feedback for High-Bandwidth Power Amplifier Linearization
Current RF power amplifier (PA) linearization techniques are presently being investigated to improve PA linearity and power efficiency. One such linearization technique, Cartesian feedback (CFB), makes use of analog feedback to linearize a nonlinear plant (Figure 1). The commanded baseband symbol, I and Q, are compared to the symbol being transmitted by the PA, the baseband symbol is predistort...
متن کاملVibration Isolation System Using Zero-power Magnetic Suspension
A new vibration isolation system is proposed which uses zero-power magnetic suspension. Since a zero-power system behaves as if it has a negative stiffness, combining it with a normal spring can generate infinite stiffness against disturbances on the isolation table. It enables the system to have good performance both in reducing vibration transmitted from ground and in suppressing direct vibra...
متن کاملA Nested Reactive Feedback Power Amplifier for Q-band Operation
A power amplifier topology is presented that incorporates a feedback network around the active device that can be tuned for smalland large-signal circuit operation. The PA is fabricated in a 120-nm SiGe BiCMOS process and from 37-47 GHz. The PA achieves a saturated output power of 23 dBm and a peak PAE of 20% at 38 GHz.
متن کاملA Novel Resistive Capacitive Feedback Trans-impedance Amplifier Optimization Using IPSO Algorithm
A novel low noise trans-impedance amplifier is proposed using low cost 0.18 µm CMOS technology. A resistive-capacitive feedback is used to extend the bandwidth of the amplifier. As the structure is inductor less, it is suitable for low cost integrated optical interconnects. In this paper Improved Particle Swarm Optimization have applied to determine optimal trans-resistance and noise of propose...
متن کاملTwo Baseband Logarithmic Amplifier Designs Using Parallel Feedback Amplifier Cells
In this work, parallel feedback amplifiers (PFAs) are presented as a means of generating ultra broadband logarithmic amplifiers. The low frequency gain equations and an AC model of PFAs are given. A circuit is presented for automatic, on-chip DC offset error reduction. In addition, circuits for achieving temperature and process stable, high power, low noise logarithmic amplifiers are described....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Industry Applications
سال: 1998
ISSN: 0913-6339,1348-8163
DOI: 10.1541/ieejias.118.916