AC Etching Characteristics of Aluminum in Hydrochloric/sulfuric Acid Solution.
نویسندگان
چکیده
منابع مشابه
Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution
In this paper, the morphology of chemically etched silicon with various concentration is reported. The surface of Silicon (100) has pyramidal structures which can be used for anti-reflection applications in solar cells. Pyramidal structures can capture incident sun light therefore can enhance the efficiency of silicon solar cells. The structure of silicon pyramid was studied using scanni...
متن کاملSpectral Transmittance Characteristics of Holmium Oxide in Perchloric Acid Solution
Accepted: November 28, 1984 The work describes the methods and procedures used to determine the wavelengths of minimum transmittance of holmium oxide in perchloric acid solution. Measurements of spectral transmittance of the solutions were made by means of a high precision spectrophotometer over the wavelength range 200 nm to 680 nm. The wavelength scale accuracy of this instrument was verified...
متن کاملEtching with Hydrofluoric Acid
Photoresists, wafers, plating solutions, etchants and solvents ... Phone: +49 731 977343 0 www.microchemicals.eu [email protected] Etching of SiO2, Quartz, and Glasses with HF Hydrofluoric acid is the only etchant which attacks amorphous SiO2, quartz, or glasses at significant high etch rate. However, HF is not only a strong corrosive, but also highly toxic towards higher concentrations: ...
متن کاملEtching with Hydrofluoric Acid
Photoresists, developers, remover, adhesion promoters, etchants, and solvents ... Phone: +49 731 36080-409 www.microchemicals.eu e-Mail: [email protected] Etching of SiO2, Quartz, and Glasses with HF Hydrofluoric acid is the only etchant which attacks amorphous SiO2, quartz, or glasses at significant high etch rate. However, HF is not only a strong corrosive, but also highly toxic towards...
متن کاملTMAH/IPA anisotropic etching characteristics
The main advantage of tetramethyl ammnium hydroxide (TMAH)-based solutions is their full compatibility with IC technologies. In this work a new etching system of TMAH/IPA (isopropyl alcohol) is suggested. The influence of the addition of IPA to TMAH solutions on their etching characteristics is presented. The etch rates of (100) oriented silicon crystal planes decreases linearly with decreasing...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1998
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.49.643