Abstract: Interfacial effects on ferromagnetic resonance: MBE iron films
نویسندگان
چکیده
منابع مشابه
Ferromagnetic resonance force microscopy on microscopic cobalt single layer films
We report mechanical detection of ferromagnetic resonance ~FMR! signals from microscopic Co single layer thin films using a magnetic resonance force microscope ~MRFM!. Variations in the magnetic anisotropy field and the inhomogeneity of were clearly observed in the FMR spectra of microscopic Co thin films 500 and 1000 Å thick and ;403200 mm in lateral extent. This demonstrates the important pot...
متن کاملThe Effects Of Interfacial Roughness On The Argon Ion Implanted Tantalum Films
In the present study, effect of interfacial roughness on the ion implanted Tantalum based surfaces has been investigated. The argon ions with energy of 30 keV and in doses of 1×1017 , 3×1017 , 5×1017 , 7×1017 , and 10×1017 (ion/cm2) have been used at ambient temperature. The Atomic Force Microscopy (AFM), analysis have been used to study and characterize the surfaces morphology. The effect of ...
متن کاملFerromagnetic resonance linewidth in thin films coupled to NiO
The out-of-plane angular dependence of the ferromagnetic resonance linewidth, ∆H, has been measured for thin magnetic films coupled to NiO and for uncoupled control films. In the control films, ∆H is described by nearly angle-independent damping parameters. In the NiO-coupled films, however, the damping was found to depend strongly on magnetization orientation, with linewidth values comparable ...
متن کاملElastically driven ferromagnetic resonance in nickel thin films.
Surface acoustic waves (SAWs) in the GHz frequency range are exploited for the all-elastic excitation and detection of ferromagnetic resonance (FMR) in a ferromagnetic-ferroelectric (Ni/LiNbO(3)) hybrid device. We measure the SAW magnetotransmission at room temperature as a function of frequency, external magnetic field magnitude, and orientation. Our data are well described by a modified Landa...
متن کاملInterfacial effects on moisture absorption in thin polymer films.
Moisture absorption in model photoresist films of poly(4-hydroxystryene) (PHOSt) and poly(tert-butoxycarboxystyrene) (PBOCSt) supported on silicon wafers was measured by X-ray and neutron reflectivity. The overall thickness change in the films upon moisture exposure was found to be dependent upon the initial film thickness. As the film becomes thinner, the swelling is enhanced. The enhanced swe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Physics
سال: 1984
ISSN: 0021-8979,1089-7550
DOI: 10.1063/1.334062