Abrasive wear study of an acrylonitrile butadiene rubber (NBR) rotary seal in dry and muddy contact using a micro-abrasion tester
نویسندگان
چکیده
منابع مشابه
study of the thermally stimulated depolarization current (tsdc) for composites of acrylonitrile butadiene rubber (nbr) loaded with haf
the thermally stimulated discharge (tsdc) current is studied for acrylonitrile butadiene rubber (nbr) loaded with different high abrasion furnace carbon black (haf). tsdc peak appears only for higher haf contents > 60phr (70 and 80phr of haf contents), the tsdc spectra consist of a sharp peak corresponding to a peak temperature tm which is slightly shifted to higher temperature for 70phr ...
متن کاملBarrierity of hydrogenated butadiene-acrylonitrile rubber and butyl rubber after exposure to organic solvents.
Resistance of antichemical clothing primarily depends on the type of material it is made from, in particular on the type of polymer used for coating the fabric carrier. This paper reports on systematic investigations on the influence of the cross-linking density of an elastomer and the composition of a cross-linked elastomer on its resistance to permeation of selected organic solvents. Tests of...
متن کاملAn investigation on chloroprene-compatibilized acrylonitrile butadiene rubber/high density polyethylene blends
Blends of acrylonitrile butadiene rubber/high density polyethylene (NBR/HDPE) compatibilized by Chloroprene rubber (CR) were prepared. A fixed quantity of industrial waste such as marble waste (MW, 40 phr) was also included. The effect of the blend ratio and CR on cure characteristics, mechanical and swelling properties of MW-filled NBR/HDPE blends was investigated. The results showed that the ...
متن کاملInvestigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel
The aim of the present study was to investigate the effect of quenching and tempering temperatures on the microstructure, mechanical properties and the wear characteristics of medium carbon-high chromium wear resistant steel. In addition, the dominant wear mechanisms were studied. For this purpose, austenitizing and tempering temperatures were selected in the ranges of 900- 1000 °C and 300- 500...
متن کاملDegradation of acrylonitrile butadiene rubber and fluoroelastomers in rapeseed biodiesel and hydrogenated vegetable oil
III To my mother and father IV ABSTRACT Biodiesel and hydrotreated vegetable oil (HVO) are currently viewed by the transportation sector as the most viable alternative fuels to replace petroleum-based fuels. The use of biodiesel has, however, been limited by the deteriorative effect of biodiesel on rubber parts in automobile fuel systems. This work therefore aimed at investigating the degradati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Superficies y Vacío
سال: 2017
ISSN: 1665-3521
DOI: 10.47566/2017_syv30_1-010001