Abrasive wear of high chromium Fe-Cr-C hardfacing alloys
نویسندگان
چکیده
منابع مشابه
THE EFFECT OF HEAT TREATMENT ON ABRASIVE WEAR RESISTANCE OF Fe-34Cr-4.5C%WT HARDFACING ALLOY
Abstract: Hardfacing is one of the most useful and economical ways to increase the service life of components subjected to abrasive wear. Iron based hardfacing alloys have long been considered as candidate coatings for wear-resistant applications in industry. In the present work two layer of Fe-34Cr-4.5C%wt hardfacing alloy was deposited on ASTM A36 carbon steel plates by SMAW method. The m...
متن کاملEffect of Chromium Content on Microstructure and Wear Resistance of Fe-Cr-C Hard facing Layers
Layers of Fe-Cr-C Hard facing material containing various amounts of chromium were deposited on mild steel base metal. Optical Microscope (OM), Scanning Electron Microscope (SCM) and X-ray diffraction (XRD) were used to investigate the effect of chromium content of micro structural characteristics of Fe-Cr-C hard facing layers. The M7C3 carbide refinement mechanism exists on base metal. The exp...
متن کاملWear Characteristic of Stellite 6 Alloy Hardfacing Layer by Plasma Arc Surfacing Processes
The microstructure and wear resistance of Stellite 6 alloy hardfacing layer at two different temperatures (room temperature and 300°C) were investigated by plasma arc surfacing processes on Q235 Steel. Tribological test was conducted to characterize the wear property. The microstructure of Stellite 6 alloy coating mainly consists of α-Co and (Cr, Fe)7C3 phases. The friction coefficient of Stell...
متن کاملEvaluating abrasive wear of amorphous alloys using nanoscratch technique
The hardness and elastic modulus of several Zr, Pd, Cu, and La-based amorphous alloys were investigated using nanoindentation. Abrasive wear of these alloys was also evaluated and compared using nanoscratch techniques under a ramping load. Damage caused by scratching was examined using SEM. Material pile-up took place in all scratched samples, but to different degrees. The scratched surface was...
متن کاملAN INVESTIGATION ON ABRASIVE WEAR BEHAVIOUR OF Fe-C-Mo-FeCr COMPOSITE PRODUCED BY POWDER METALLURGY
In this study, the effect of chromium carbide (Cr7C3) on abrasive wear behavior of Fe-C-Mo-FeCr composite was investigated. Composite, which was produced by a powder metallurgy route was containing 3 wt.% Mo, 1.5 wt. % C and 4,8,12 wt. % FeCr with the different particle sizes. In the experiments, wear resistance of samples were determined using different loads by a pin on disc wear tester. Micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Research in Agricultural Engineering
سال: 2008
ISSN: 1212-9151,1805-9376
DOI: 10.17221/1/2008-rae