Abrasive wear effect on Polyethylene, Polyamide 6 and polymeric particle composites
نویسندگان
چکیده
منابع مشابه
Abrasive Wear in Three-phase Waste-based Polymeric Particle Composites
Original scientific paper The experiment centres on two and three body abrasion in three-phase waste-based composite systems. The composite systems abrasion resistance is defined not only by the physical-mechanical relationships of the separate phases of the composite, but also by the mutual interaction of the phases and on the matrix-filler interface. To describe the composite system abrasion ...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملRecycling of Corundum Particles - Two-body Abrasive Wear of Polymeric Composites Based on Waste
Original scientific paper Recycling of all materials should be supported by modern society. Material recycling is one of the most important ways of dealing with waste. One of material recycling possibilities is an inclusion of waste into primary matrices. A suitable ratio and a combination of waste particles influence in a positive way mechanical properties of the material in which they are dis...
متن کاملEffect of Abrasive Particle Size on Abrasive Wear Resistance in Otomotive Steels
If one of the surfaces which are in touch is rough and hard, it chips the other surface due to relative motion or touching forces. The wear is called two-body abrasive wear. If there are free abrasive particles between the two bodies, the wear is called three-body abrasive wear. The free abrasive particles may be external material dust or the remains of chipping. Usually, the wear starts as a t...
متن کاملeffect of fiber surface treatment on wear characteristics of carbon fiber reinforced polyamide 6 composites
ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(pan)-based carbon fiber. the surface characteristics of carbon fibers were characterized by x-ray photoelectron spectroscopy (xps). the interfacial properties of carbon fiber reinforced polyamide 6 (cf/pa6) composites were investigated by means of the single fiber pull-out tests. as a result, it...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Manufacturing Technology
سال: 2012
ISSN: 1213-2489,1213-2489
DOI: 10.21062/ujep/x.2012/a/1213-2489/mt/12/1/55