Abrasive Disc Performance in Dry-Cutting of Medium-Carbon Steel
نویسندگان
چکیده
منابع مشابه
Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel
The aim of the present study was to investigate the effect of quenching and tempering temperatures on the microstructure, mechanical properties and the wear characteristics of medium carbon-high chromium wear resistant steel. In addition, the dominant wear mechanisms were studied. For this purpose, austenitizing and tempering temperatures were selected in the ranges of 900- 1000 °C and 300- 500...
متن کاملOptimization of Cutting Parameters for Surface Roughness of Stainless Steel Ss304 in Abrasive Assisted Drilling
This paper is concerned with optimization of surface roughness when drilling of stainless steel SS304 with HSS drill. This study included drilling of SS304 with supply of Sic abrasive having grain size 650 and 1250 mesh size through abrasive slurry system. Abrasives not only used for cooling purpose but also increases the surface finish, MRR and reduce tool wear. Experiments were conducted on a...
متن کاملEvaluation of Disc Cutter Performance in Rock Cutting Process Using 3D Finite Element Method
Today, numerical simulation can be used as a suitable tool to measure large quantities that are very expensive and, in some cases, impossible to measure. One of the important issues in predicting rock mass boreability in excavation with full face tunnel boring machines is estimating the discchr('39')s forces for rock cutting. For this purpose, the linear cutting test is employed. However, limi...
متن کاملSurface Texture in Abrasive Waterjet Cutting
When cutting thick material with an abrasive wateriet, the surface area can be characterized by two texture types. At the top of the cut, the surface texture is smooth. At the bottom, the slurry jet exiting the workpiece forms large striations in the surface. An investigation was conducted to experimentafly determine the influence of the abrasive waterjet cutting parameters on surface texture. ...
متن کاملinvestigation of wear mechanism in quenched and tempered medium carbon-high chromium martensitic steel using dry sand/rubber wheel
the aim of the present study was to investigate the effect of quenching and tempering temperatures on themicrostructure, mechanical properties and the wear characteristics of medium carbon-high chromium wear resistantsteel. in addition, the dominant wear mechanisms were studied. for this purpose, austenitizing and temperingtemperatures were selected in the ranges of 900- 1000 °c and 300- 500 °c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2020
ISSN: 2075-4701
DOI: 10.3390/met10040538