A Zener-Stroh crack interacting with an edge dislocation
نویسندگان
چکیده
منابع مشابه
A Zener±Stroh crack in a ®ber-reinforced composite material
A Zener±Stroh crack is formed by coalescing a dislocation pileup and therefore is a net dislocation loaded crack. In this paper, the interaction between a Zener±Stroch crack and surrounding cylindrical ®bers in a ®ber-reinforced composite material has been investigated. The crack is located in the matrix and near a ®ber, while the in ̄uence of other ®bers on the crack is considered through the t...
متن کاملScrew Dislocation Interacting with an Interfacial Edge Crack between Two Bonded Dissimilar Piezoelectric Wedges
This letter is concerned with an interfacial edge crack in a piezoelectric bimaterial wedge interacting with a screw dislocation under antiplane mechanical and in-plane electric loading. In addition to a discontinuous electric potential across the slip plane, the dislocation is subjected to a line-force and a line-charge at the tip. The out-of-plane displacement and electric potentials are obta...
متن کاملA Normally Loaded Half-plane with an Edge Crack
The study of brittle or fatigue fracture that involves contact along the crack faces is difficult for several reasons. On the one hand, material data pertaining to the growth of cracks in a compressive environment are scant, and, on the other, frictional stresses may be transmitted across the contacting crack faces. The analysis of cracks under these conditions is complicated. Nevertheless, sol...
متن کاملEffect of T-stress on Edge Dislocation Formation at a Crack Tip under Mode I Loading
We calculate the effect of the nonsingular stress acting parallel to a crack (the “Tstress”) on edge dislocation nucleation at a crack loaded in Mode I. We find that this leads to crack size effect – that is, for small cracks (of order 100 atomic spacings or less), the T stress causes the critical load for dislocation nucleation (expressed in terms of the applied stress intensity factor) to dev...
متن کاملScrew dislocation interacting with twin interfacial edge cracks between two bonded dissimilar piezoelectric strips
This paper is concerned with the electroelastic potentials and the fracture parameters of a twinedge-cracked piezoelectric bimaterial strip with a screw dislocation. By means of conformal mapping technique and the known dislocation solution, the antiplane displacement and inplane electric potentials are obtained in closed-form. The intensity factors and the energy release rate are extracted exp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Theoretical and Applied Mechanics Letters
سال: 2011
ISSN: 2095-0349
DOI: 10.1063/2.1102103