A variable probe pitch micro-Hall effect method
نویسندگان
چکیده
منابع مشابه
Room temperature scanning Hall probe microscopy using GaAs/AlGaAs and Bi micro-hall probes.
A room temperature scanning Hall probe microscope system utilizing GaAs/AlGaAs and bismuth micro-Hall probes was used for magnetic imaging of ferromagnetic domain structures on the surfaces of crystalline thin film garnets and permanent magnets. The Bi micro-Hall probes had dimensions ranging between 0.25 and 2.8 microm2 and were fabricated using a combination of optical lithography and focused...
متن کاملBismuth Micro and Nano Hall Sensors on Photo-plastic Cantilevers for Scanning Hall Probe Microscopy
Conventional Hall devices are widely employed to measure magnetic fields produced by millimetre sized (or larger) current-caring conductors or permanent magnets with a standard active area of about (100 μm). Micro-Hall sensors have recently emerged as a powerful and sensitive tool for the investigation of local magnetic field properties of the micro and nanostructures. The conventional Hall eff...
متن کاملMethod for analyzing EÃB probe spectra from Hall thruster plumes
Various methods for accurately determining ion species’ current fractions using E B probes in Hall thruster plumes are investigated. The effects of peak broadening and charge exchange on the calculated values of current fractions are quantified in order to determine the importance of accounting for them in the analysis. It is shown that both peak broadening and charge exchange have a significan...
متن کاملScanning hall probe microscopy technique for investigation of magnetic properties
Scanning Hall Probe Microscopy (SHPM) is a scanning probe microscopy technique developed to observe and image magnetic fields locally. This method is based on application of the Hall Effect, supplied by a micro hall probe attached to the end of cantilever as a sensor. SHPM provides direct quantitative information on the magnetic state of a material and can also image magnetic induction under a...
متن کاملScanning hall probe microscopy technique for investigation of magnetic properties
Scanning Hall Probe Microscopy (SHPM) is a scanning probe microscopy technique developed to observe and image magnetic fields locally. This method is based on application of the Hall Effect, supplied by a micro hall probe attached to the end of cantilever as a sensor. SHPM provides direct quantitative information on the magnetic state of a material and can also image magnetic induction under a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Beilstein Journal of Nanotechnology
سال: 2018
ISSN: 2190-4286
DOI: 10.3762/bjnano.9.192