A tri-band terrestrial beacon digital receiver system for TEC measurements
نویسندگان
چکیده
The ionosphere is an important component of near-Earth space that has a significant impact on communication and navigation. Furthermore, the total electron content (TEC) widely used parameter in plasma environment studies. A design digital beacon receiver system for automatically measuring TEC presented. Universal Software Radio Peripheral (USRP) hardware equipment with software-defined radio technology was tri-band to receive rapidly preprocess signals from satellites different frequency bands. software built implement automatic control enable data processing preprocessed order obtain its phase information derive TEC. experimentally proven detect archive transit real time, process satellite recording, generate measurement results.
منابع مشابه
Typical Ka band Satellite Beacon Receiver Design for Propagation Experimentation
This paper presents the design and simulation of a typical Ka band satellite beacon receiver for propagation experimentation. Using satellite beacon signal as a reference signal in satellite wave propagation study, is one of the most important methods. Satellite beacons are frequently available for pointing large antennas, but such signals can be used for measuring the effect of natural phenome...
متن کاملtypical ka band satellite beacon receiver design for propagation experimentation
this paper presents the design and simulation of a typical ka band satellite beacon receiver for propagation experimentation. using satellite beacon signal as a reference signal in satellite wave propagation study, is one of the most important methods. satellite beacons are frequently available for pointing large antennas, but such signals can be used for measuring the effect of natural phenome...
متن کاملNon Contiguous Tri-band Receiver for Carrier Aggregation RF System
The carrier aggregation technique will allow an increase of capacity of the 4 Generation mobile communication networks (LTE-A: Long Term Evolution Advanced). The probability to find carriers that occupy a continuous spectrum in frequency is very low. The challenge is to demodulate an RF signal where the information is distributed on non-contiguous frequency bands. The technique presented in thi...
متن کاملDesign and Development of Ka Band Digital Beacon Receiver for Ka Band Propagation Studies Experiment
India is planning to conduct its own Ka band propagation studies experiment in order to validate the existing ITU model and to develop a more accurate prediction model for its unique climate condition for guaranteed QoS. This experiment involves measurement of signal attenuation due to rain and development of appropriate mathematical propagation models. This requires a ground receiver to receiv...
متن کاملA Ka-band Satellite Beacon Receiver for Propagation Experiment
The design of a low-cost beacon receiver based on software defined radio is presented. The motivation for such a receiver is to investigate atmospheric impairments at the Ka frequency band. The receiver has been tested by the Hotbird 13A, ASTRA 3B and Alphasat satellite beacon signals. A GNU Radio software development toolkit and a USRP device were used for the development of a beacon receiver ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frontiers in Astronomy and Space Sciences
سال: 2023
ISSN: ['2296-987X']
DOI: https://doi.org/10.3389/fspas.2023.1167331