A torsional sensor for MEMS-based RMS voltage measurements
نویسندگان
چکیده
منابع مشابه
A Piezoresistive MEMS Sensor for Acoustic Noise Measurements
A MEMS piezoresistive acoustic sensor has been developed for measurement of jet screech noise. The new sensor was calibrated in the sound field of an air siren. Two sensors with a size of 510 and 710 pm were tested and compared to commercial sensors. The results show that the MEMS sensors are five to eight times more sensitive than the smallest commercially available piezoresistive sensors. Fur...
متن کاملA torsional MEMS varactor with wide dynamic range and low actuation voltage
A MEMS varactor using torsional beams for actuation is proposed. Analytical expression for electrostatic torque developed is derived. The structure is compared with existing structures for dynamic range and actuation voltage. It is demonstrated that the proposed varactor outperforms the other structures in terms of wide dynamic range and lower actuation voltage, coupled with ease of fabrication...
متن کاملNew Design of Mems piezoresistive pressure sensor
The electromechanical analysis of a piezoresistive pressure microsensor with a square-shaped diaphragm for low-pressure biomedical applications is presented. This analysis is developed through a novel model and a finite element method (FEM) model. A microsensor with a diaphragm 1000 „m length and with thickness=400 µm is studied. The electric response of this microsensor is obtained with applyi...
متن کاملA Mems Affinity Glucose Sensor Using Permittivity Measurements
We present a MEMS affinity glucose sensor using permittivity measurements. This device employs a biocompatible glucose-specific polymer as the sensing solution. By introducing the polymer solution between two electrodes, the permittivity of the polymer solution can be measured from the capacitance changes induced by glucose binding. We characterize the frequency-dependent complex permittivity a...
متن کاملMEMS based Sun Sensor on a Chip
A prototype sun sensor has been developed. It consists of a thin slice of silicon coated with a layer of chrome and a layer of gold with hundreds of small pinholes, placed on top of an Active Pixel Sensor (APS) image detector at a distance of 500 microns. Images of the sun are formed on the APS image detector when the sun illuminates the mask. Image processing of the Sun image is performed exte...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Radio Science
سال: 2008
ISSN: 1684-9973
DOI: 10.5194/ars-6-31-2008