A thermopneumatic micropump based on micro-engineering techniques
نویسندگان
چکیده
منابع مشابه
Biomimic PDMS Valve Applied in Thermopneumatic Micropump
A passive biomimic PDMS valve applied in thermopneumatic micropump is firstly designed and realized. Unlike the conventional peristaltic pumping configuration, the micropump consists of two stacking layers of PDMS on a glass slide. This sandwich-type structure builds up two chambers. A thermopneumatic actuation chamber consists of a 57 ohm heater on the glass slide; the other fluid chamber is c...
متن کاملOptically driven Archimedes micro-screws for micropump application.
Archimedes micro-screws have been fabricated by three-dimensional two-photon polymerization using a Nd:YAG Q-switched microchip laser at 532nm. Due to their small sizes they can be easily manipulated, and made to rotate using low power optical tweezers. Rotation rates up to 40 Hz are obtained with a laser power of 200 mW, i.e. 0.2 Hz/mW. A photo-driven micropump action in a microfluidic channel...
متن کاملA microfluidic device based on an evaporation-driven micropump
In this paper we introduce a microfluidic device ultimately to be applied as a wearable sweat sensor. We show proof-of-principle of the microfluidic functions of the device, namely fluid collection and continuous fluid flow pumping. A filter-paper based layer, that eventually will form the interface between the device and the skin, is used to collect the fluid (e.g., sweat) and enter this into ...
متن کاملA Piezoelectric Micropump Based on Micromachining Silicon Of
The design and realization of two pumps based on micromachining of silicon are described. The pumps, which are of the reciprocating displacement type, comprise one or two pump chambers, a thin glass pump membrane actuated by a piezoelectric disc and passive silicon check valves to direct the flow. Chambers, channels and valves are realized in a silicon wafer by wet chemical etching. The results...
متن کاملA Liquid-Metal Based Spiral Magnetohydrodynamic Micropump
A liquid-metal based spiral magnetohydrodynamic (MHD) micropump is proposed in this work. The micropump was fabricated in a polydimethylsiloxane (PDMS)-glass hybrid microfluidic chip. This pump utilized two parallel liquid-metal-filled channels as electrodes to generate a parallel electrical field across the pumping channel between the two electrodes. To prevent contact and cross contamination ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors and Actuators A: Physical
سال: 1990
ISSN: 0924-4247
DOI: 10.1016/0924-4247(90)85038-6