A tapered line termination at microwaves

Ultra Wideband Power Divider Using Tapered Line

A power divider with ultra-wideband (UWB) performance has been designed. The quarter-wave transformer in the conventional Wilkinson power divider is replaced by an exponentially tapered microstrip line. Since the tapered line provides a consistent impedance transformation across all frequencies, very low amplitude ripple of 0.2 dB peak-to-peak in the transmission coefficient and superior input ...

Slot Antenna Fed by a Cpw Line with Tapered Transition

A tapered coplanar waveguide (CPW) transition is proposed in order to facilitate the connection between a slot antenna and coaxial connector. The broadband bow-tie slot antenna is considered as an example in this design. The tapered transition is utilized to optimize the connection of two 50 CPW lines with different widths. A narrow CPW line is connected to the slot-antenna feed point and the w...

Infrared and microwaves at 5.8 GHz in a catalytic reactor.

An improved micro-reactor cell for IR spectroscopic studies of heterogeneous catalysis was built around a 5.8 GHz microwave cavity. The reactor can operate at 20 bars and with conventional heating up to 720 K, with reactant gas flows velocities (GHSV) from 25,000 to 50,000 h(-1). The temperature of the sample under microwave irradiation was measured by time resolved IR emission spectroscopy. Th...

Design of back-to-back tapered line transition

A design of back-to-back tapered line transition is presented. The transition is suitable for application in feeding arrays of double-side printed antennas. Tapered transmission lines are transmission line whose characteristic impedance is tapered from one value to another. Back-to-back circuits of identical transitions are designed, measured, and their characteristics are compared with theoret...

Proving Termination One Loop at a Time