A Sustainable Building Material Developed from Low-Temperature Sintering of Mining Waste with an Alkali-Silicate Solution

نویسندگان

چکیده

The development of glass-ceramic foam has received significant attention in building and construction, given its potential for sustainability. This study investigated the low-temperature route fabricating foams from mining waste. feasibility one-step or chemical-aided sintering using granite powder, a naturally sourced waste, rather than already heat-treated wastes such as glass fly ash been explored this study. Glass-ceramic samples were synthesized homogenous blend constant percentage by weight granite-clay mix with varying amounts alkali-silicate solution. influence solution on physicomechanical microstructural properties sintered at 850°C was investigated. results showed water absorption 9.5-33.3%, apparent porosity 18.2-56.7%, bulk density 1.7-1.91 g/cm3, compressive strength 20.7-26.3MPa. developed research can be suitably used thermal insulation buildings.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Multilevel Tunnelling Systems and Fractal Clustering in the Low-Temperature Mixed Alkali-Silicate Glasses

The thermal and dielectric anomalies of window-type glasses at low temperatures (T < 1 K) are rather successfully explained by the two-level systems (2LS) standard tunneling model (STM). However, the magnetic effects discovered in the multisilicate glasses in recent times, magnetic effects in the organic glasses, and also some older data from mixed (SiO₂)(1-x) (K₂O)(x) and (SiO₂)(1-x) (Na₂O)(x)...

متن کامل

Green Concrete: An Efficient and Eco-Friendly Sustainable Building Material

Green concrete is a concept of thinking environment into concrete considering every aspect from raw materials manufacture over mixture design to structural design, construction and service life. Green concrete is a type of concrete which resembles the conventional concrete but the production or usage of such concrete requires minimum amount of energy and causes least harm to the environment. Si...

متن کامل

Low-Temperature Sintering of Alumina with Liquid-Forming Additives

Simultaneous application of colloidal processing and liquidforming additives to alumina resulted in a sintered density of >99% in 1 h at a temperature as low as 1070°C for a commercial high-purity alumina powder at a total dopant level of 2 mol%. The additives were 0.9% CuO + 0.9% TiOz + 0.1% B 2 0 3 + 0.1% MgO. At higher temperatures or after prolonged sintering, the doped alumina ceramic deve...

متن کامل

Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation

Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation I. Ponsot, R. Detsch, A. R. Boccaccini & E. Bernardo To cite this article: I. Ponsot, R. Detsch, A. R. Boccaccini & E. Bernardo (2015) Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation, Advances in Applied Ceramics, 114:sup1, S17-S25, DOI: 10.1179...

متن کامل

Low Temperature Sintering Additives for Silicon Nitride

This work deals with sintering additives for the low temperature pressureless sintering of Si3N4, via a transient liquid technique. Much attention has been given to the development of a sintering process using low-cost Si3N4 powder (Silzot HQ, Germany) as the starting material and employing sintering additives which are also both economically attractive and enable sintering at low temperatures....

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Gazi university journal of science part a:engineering and innovation

سال: 2023

ISSN: ['2147-9542']

DOI: https://doi.org/10.54287/gujsa.1245213