A Study on Railroad Track Capacity According to Transit Railway Demand
نویسندگان
چکیده
منابع مشابه
A Study to Predict the Development of Wear for the Wheel/interface of a Railway Track
The train transport is often confronted with greatly repeated changes in scope, vehicle travel well-being and transport safety because of the adjustments of wheel and rail profiles. These problems are frustrating and threatening. Thus, there is a requirement for an approach to predicting the wear of wheel/rail to tackle these problems. A new theoretical ground is broken through the build-up a m...
متن کاملInfluences of Railway Track Geometry Parameters on Ground-Borne Vibration
One of the most important challenges in the development of urban railways network is the effects of railway vibrations on human and adjacent structures. Although various investigations into the sources of railway vibrations have been conducted, very few research works have been reported on the influences of track geometry parameters on the level of vibrations. This is addressed in this resea...
متن کاملInvestigation of the Influences of Track Superstructure Parameters on Ballasted Railway Track Design
The main design criteria of ballasted railway tracks include rail deflections, rail bending stresses, rail wheel contact stresses, sleeper bending moments and ballast sleeper contact pressures. Numerous criteria have been defined for the design of ballasted railway tracks owing to the various mechanical properties of track components and their complex interaction. Therefore, railway track desig...
متن کاملSquare Joints in Railway Track Waves
When rails are laid in a railway track, small gaps are left between the ends of adjoining rails to allow for the expansion of the rails when the temperature rises. Rail joints are provided to form a continuous rail path which are normally laid in standard lengths bolted together by fishplates. When two rail joints are exactly opposing each other, they are called square (side by side) joints...
متن کاملSquare Joints in Railway Track Waves
When rails are laid in a railway track, small gaps are left between the ends of adjoining rails to allow for the expansion of the rails when the temperature rises. Rail joints are provided to form a continuous rail path which are normally laid in standard lengths bolted together by fishplates. When two rail joints are exactly opposing each other, they are called square 

(side by side) jo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Operations Research and Management Science Society
سال: 2013
ISSN: 1225-1119
DOI: 10.7737/jkorms.2013.38.3.023