A STUDY ON FLEXURAL-SHEAR BEHAVIOR OF TIMBER JOINT USING LAGSCREWBOLTS, DRIFTPINS AND STEEL PLATE

Experimental and Numerical Study of Perforated Steel Plate Shear Panels

Thin perforated Steel Plate Shear (SPS) Walls are among the most common types of energy dissipating systems. The applied holes reduce the shear strength of the plate and allow to decrease the profile size of the members at the boundary of the panel when these systems are used in the typical design of structures. On the other hand, the different fracture locations of these panels are visible whe...

Non-Linear Behavior and Shear Strength of Diagonally Stiffened Steel Plate Shear Walls

In this study, non-linear behavior of diagonally stiffened steel plate shear walls as a seismic resisting system has been investigated, and theoretical formulas for estimating shear strength capacity of the system have been proposed. Several validated analytical finite element models of steel shear walls with various stiffener dimensions are generated to verify and compare the analytical and th...

Experimental Study on Flexural Behavior of Precast Concrete Shear Walls with Vertical Joint

Behavior of Vertical Boundary Elements in Steel Plate Shear Walls

The AISC Seismic Provisions and CSA S-16 Standard require a minimum moment of inertia for the vertical boundary elements (VBEs) in steel plate shear walls (SPSWs) to avoid undesirable VBE behaviors. The equation limiting VBE flexibility has been derived from a flexibility factor, ωt, developed in plate girder theory and the limit on VBE flexibility has been empirically specified based on previo...

Seismic Behavior of Intermediate Beams in Steel Plate Shear Walls

This paper presents some preliminary results of an ongoing research whose objective is to investigate the seismic behavior of intermediate beams (i.e., the beams other than those at the roof and foundation levels) in multi-story steel plate shear walls (SPSWs). Of primary interest is the determination of the strength level needed to avoid the formation of in-span plastic hinges, a relevant prac...