A Study of Mechanical and Thermal Properties Polymer Blend from Polystyrene with Poly(ԑ-Caprolactone) that Obtained Using Bis(Dibenzoylmethanato)Zirconium(IV) Chloride Catalyst
نویسندگان
چکیده
Polystyrene (PS) is one form of the plastic that most widely utilized for household application. However, plastics made from PS can pollute environment. Hence, it necessary to modify by mixing with a biodegradable polymer like poly (ɛ-caprolactone) (PCL). The focus this research was determine mechanical and thermal properties PS/PCL polyblends. In research, polyblend are prepared PCL acquired using bis(dibenzoylmethanato)zirconium(IV) chloride bis(dibzm)2Zr catalyst. method employed solvent casting ratio 10/0, 10/1, 10/2, 10/3, 10/4 (w/w). optimum were obtained in 10/2 which had tensile strength 6.72 MPa 1.01% elongation. Furthermore, also characterized DSC its properties.
منابع مشابه
investigation of thermal comfort properties of woven sport fabric using blend of estabragh fibers
امروزه لباس در نظر ورزشکاران و کسانی که برای اوقات فراغت خود و یا برای رسیدن به اندامی متعادل، ورزش می کنند؛ بسیار با اهمیت است. احساس مطلوب از لباس در زمره خصوصیات راحتی پوشش می باشد. خصوصیات انتقال رطوبت لباس، در ارزیابی راحتی حسی و حرارتی منسوجات تولید شده از آن ها بسیار مهم است. هدف از این تحقیق، معرفی پارچه جدید است که متشکل از الیاف استبرق با خواص منحصر به فرد می باشد. استبرق لیف طبیعی تو...
Studying the Mechanical and Thermal Properties of Polymer Nanocomposites Reinforced with Montmorillonite Nanoparticles Using Micromechanics Method
In this study, the mechanical and thermal behavior of the nano-reinforced polymer composite reinforced by Montmorillonite (MMT) nanoparticles is investigated. Due to low cost of computations, the 3D representative volume elements (RVE) method is utilized using ABAQUS finite element commercial software. Low density poly ethylene (LDPE) and MMT are used as matrix and nanoparticle material, respec...
متن کاملMulti‐jet electrospinning of polystyrene/ polyamide 6 blend: thermal and mechanical properties
Introduction Electrospinning process is broadly used to obtain membrane-like webs with submicron to micron fibers (Li and Xia 2004). Electrospun nanofibers, with its large surface area and multiple pores, can be used to construct unique functional nanostructures for composites, filtration membranes, biomaterials, and breathable textile fabrics (Greiner and Wendorff 2007; Li and Xia 2004; Pham e...
متن کاملextraction and acetylation of purified trypsin from bovin pancreas and study of some its physico-chemical properties
آنزیم تریپسین در شرایط قلیایی ناپایدار می باشد .و فعالیت پروتئولیتیکی تریپسین منجربه خود هضمی آن در جایگاههای خاصی می گردد. بنابر این آنزیمی با ناپایداری بالا محسوب میگردد. در سالهای اخیر موفق شدند که با ایجاد تغیرات شیمیایی با اضافه کردن فلزات خاص ، کلسیم و یا عمل استیلاسیون منجر به افزایش پایداری آنزیم تریپسین گردند. مطالعات در حال حاضر نشان می دهد که تریپسین استیله شده فعالیت آنزیمی خود را ...
15 صفحه اولMechanical Properties and Adhesion of a Micro Structured Polymer Blend
A 50:50 blend of polystyrene (PS) and poly(n-butyl methacrylate) (PnBMA) has been characterized with an Atomic Force Microscope (AFM) in Tapping Mode and with force-distance curves. The polymer solution has been spin-coated on a glass slide. PnBMA builds a uniform film on the glass substrate with a thickness of ≅200 nm. On top of it, the PS builds an approximately 100 nm thick film. The PS-film...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Indonesian Journal of Chemical Science and Technology
سال: 2023
ISSN: ['2622-1349', '2622-4968']
DOI: https://doi.org/10.24114/ijcst.v6i2.49366