A Starting Point of Physical Chemistry in Powder Metallurgy
نویسندگان
چکیده
منابع مشابه
Porous, Superelastic NiTi Produced by Powder-Metallurgy
Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.
متن کاملPhysical metallurgy of nickel aluminides
A description of the important physical metallurgy aspects of Ni3Al and NiAl encompassing structure, crystallographic defects, slip systems and phase stability has been presented in this article. The microstructures generated in the two alloys by conventional as well as novel processing techniques have been discussed. The effect of alloying additions on the microstructure has been enumerated. B...
متن کاملHigh Porosity Metallic Glass Foam: A Powder Metallurgy Route
A powder metallurgy route to the fabrication of metallic glass foam is introduced. The method involves consolidating metallic glass powder blended with blowing agent particulates to produce expandable precursors, capable of yielding foams with porosities as high as 86%. The foams are found to inherit the strength of the parent metallic glass, and to be able to deform heavily toward full densifi...
متن کاملLubricant Pyrolysis During Sintering of Powder Metallurgy Compacts
The chemistry surrounding the pyrolysis of N,NЈ-ethylenebisstearimide (EBS) compacted with iron powder is described for the first time. Heat treatment is carried out in a 5 vol pct hydrogen atmosphere (balance nitrogen) over the 100 °C to 850 °C range. The exhaust from the furnace is monitored by Fourier transform infrared and dispersive ultraviolet absorption spectroscopy; condensable material...
متن کاملModeling and Simulation of Press and Sinter Powder Metallurgy
EFFECTIVE COMPUTER SIMULATIONS of metal powder compaction and sintering are at the top of the powder metallurgy industry’s wish list. There is much anticipated advantage to such efforts, yet there are problems that will inhibit widespread implementation. Press-sinter powder metallurgy computer simulations currently focus on the use of minimal input data to help with process setup. Although the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1988
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.74.8_1526