A Sound Velocity Measurement System for Thin Steel Sheet Based on Ultrasonic Interferometry
نویسندگان
چکیده
منابع مشابه
Ultrasonic Wind Velocity Measurement Based on Phase Discrimination Technique
According to the shortcomings of the existing ultrasonic wind velocity measurement device, for instance, complexity of circuit and difficulty of signal processing, a new ultrasonic wind velocity measurement is put forward based on phase discrimination and a new sensor configuration as well. Thus, a system model is built. Firstly, an equilateral triangle should be constituted by an ultrasonic em...
متن کاملInfluence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350
In the present work, the influence of aging temperature on mechanical properties and sound velocity of Maraging steel M350 was investigated. For this purpose, first, samples were solution annealed at 825◦C for 2 hours and then age hardened at 510◦C-600◦C for 3 hours. Hardness, tensile and impact tests were used for determining mechanical properties and longitudinal ultrasonic velocity was used ...
متن کاملSound velocity measurement using transfer function method
Abstract The transfer function of a piezoelectric transducer, buffer rod and sample assembly is used to measure the sound velocity of solid materials. From the recorded transfer function, pulse echo patterns at frequencies of the passband of the input signal are reproduced after convoluting with monochromatic RF input signals. The time delay is obtained by performing pulse echo overlap and phas...
متن کاملFPGA Based Muzzle Velocity Measurement System
Muzzle velocity is the initial velocity of a projectile as it comes out. A novel measurement method which can measure velocity of projectile by measuring its travel time. It mainly contains the laser sources and laser detectors those are employed to measure the muzzle velocity, when it comes out of a system. Light sources and detectors are placed in opposite side. During system launch, the lase...
متن کاملApplication of Interferometry in Ultrasonic System for Vibration
Vibration signals are important state parameters for mechanical equipments’ status monitoring and fault diagnosis. In this paper, in order to overcome the limitations of the traditional vibration measurement med1ods and instrument, a new non-contacting vibration method based on ultrasonic for vibration detection in special environment was presented. The mainly researched in this paper were the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1997
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.83.4_245