A Single-Stage LED Tube Lamp Driver with Input-Current Shaping for Energy-Efficient Indoor Lighting Applications
نویسندگان
چکیده
منابع مشابه
A Single-Stage LED Tube Lamp Driver with Power-Factor Corrections and Soft Switching for Energy-Saving Indoor Lighting Applications
Abstract: This paper presents a single-stage alternating current (AC)/direct current (DC) light-emitting diode (LED) tube lamp driver for energy-saving indoor lighting applications; this driver features power-factor corrections and soft switching, and also integrates a dual buck-boost converter with coupled inductors and a half-bridge series resonant converter cascaded with a bridge rectifier i...
متن کاملAn Energy Efficient LED Lighting System for Domestic Applications
This project is implemented on ARM, the sensor which detects the day light is used to switch outdoor lighting and the PIR sensor which detects the entering person into room are used here to regulate the indoor lighting intensity, which is done through PWM shifting technique. Saving the electricity is not difficult. Just by turn off the light when leaving the room, turn off computer when finish ...
متن کاملSingle-Stage Coupled-Inductor Sepic-Type HB-LED Driver with Soft Switching for Universal Line Input
This paper proposes a single-stage Sepic-type high brightness LED driver for universal line input to perform power factor correcting and LED dimming. In the driver, a coupled inductor is introduced to replace with two separate inductors to lower volume and cost. A soft-switching cell is embedded into the driver to obtain zero-voltage switching ZVS feature so as to furthermore improve driver eff...
متن کاملSingle-Stage, Single-Switch Input-Current-Shaping Technique with Reduced Switching Loss
In this paper, a new single-stage, single-switch input-current-shaping (SICS) technique which features substantially reduced turn-on switching loss of the switch in a SICS flyback topology is described. In the proposed technique, the turn-on switching loss due to the discharging of the output capacitance of the switch is reduced by turning on the switch when its voltage is minimum. To achieve t...
متن کاملSingle-Stage Single-Switch Input-Current-Shaping Technique with Fast-Output-Voltage Regulation
A new single-stage single-switch input-currentshaping (S4ICS) technique, which combines the boost-like input-current shaper with a continuous-conduction-mode (CCM) dc/dc output stage, is described. In this technique, the boost inductor can operate in both the discontinuous conduction mode (DCM) and CCM. Due to the ability to keep a relatively low voltage (<450 Vdc) on the energy-storage capacit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Power Electronics
سال: 2016
ISSN: 1598-2092
DOI: 10.6113/jpe.2016.16.4.1288