A simple method of removing obstinate self-tapping screws from bone
نویسندگان
چکیده
منابع مشابه
Bolted Timber Joints with Self-tapping Screws
The use of self-tapping screws with continuous threads in the joint area as a reinforcement to avoid splitting of timber members is studied. A theoretical model is developed to calculate the stress distribution around a pin-loaded hole in a timber joint, to predict brittle failure modes in bolted connections and to calculate the load in the reinforcing screws. Laboratory experiments on reinforc...
متن کاملSimple Technique for Removing Broken Pedicular Screws
The procedure for removing a broken pedicle screw should ideally be technically easy and minimally invasive, as any damage to the pedicle, during removal of the broken screw, may weaken the pedicle, thus compromising on the success of re-instrumentation. We describe the case of a 32-year old man who had undergone surgery for traumatic third lumbar vertebral body fracture three years prior to cu...
متن کاملThe effect of pilot hole size on the insertion torque and pullout strength of self-tapping cortical bone screws in osteoporotic bone.
BACKGROUND All surgical screws can experience failure if the torsional, tensile, and flexion loads exerted on the screws are excessively high. The use of self-tapping screws (STS) results in higher insertion torques (IT) as these screws cut their own threads in the pilot hole drilled in the bone. In this study, the torque for inserting the STS into an osteoporotic bone block for different pilot...
متن کاملa paradigm shift away from method-wise teaching to strategy-wise teaching: an investigation of reconstructive strategy versus communicative strategy
چکیده: هدف اصلی این مطالعه ی توصیفی تحقیقی در حقیقت تلاشی پساروش-گرا به منظور رسیدن به نتیجه ای منطقی در انتخاب مناسبترین راهکار آموزشی بر گرفته از چارچوب راهبردی مطرح شده توسط والدمر مارتن بوده که به بهترین شکل سازگار و مناسب با سامانه ی آموزشی ایران باشد. از این رو، دو راهکار آموزشی، راهکار ارتباطی و راهکار بازساختی، برای تحقیق و بررسی انتخاب شدند. صریحاً اینکه، در راستای هدف اصلی این پژوهش، ر...
15 صفحه اولSelf-tapping Screws as Reinforcement Perpendicular to the Grain in Timber Connections
The use of self-tapping screws with continuous threads as a reinforcement to avoid splitting of members in connections with dowel-type fasteners was studied in two projects carried out at the Universities of Nottingham and Karlsruhe. The reinforced specimens showed a very ductile failure mode whereas the non-reinforced specimens failed in a brittle way. Although the reinforced specimens also sh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Bone and Joint Surgery. British volume
سال: 1980
ISSN: 0301-620X,2044-5377
DOI: 10.1302/0301-620x.62b4.7430230