A simple method for energy calibration of keV incident electron beam using a contactless electrostatic voltmeter probe

A Simple and Fast Method for Field Calibration of Triaxial Gyroscope by using Accelerometer

A Simple Method for Modeling Open Cracked Beam

Abstract A simple method is proposed to model the open cracked beam structures. In this method, crack is modeled as a beam element. Hence cracked beam can be assumed to be a beam with stepped cross sections, and problem of determining natural frequency and mode shape of cracked beam, can be solved as determining these characteristics for a beam with different length and cross section. With this...

An electrostatic voltmeter

An electrostatic voltmeter possessing several unique features is described. The size is a minimum for such instruments, since the potential difference is applied to two electrodes, the geometrical arrangement of which is analogous to concentric spheres. The inner electrode is supported on the end of an insulating bushing introduced through the outer electrode, which is a metal can. The inner el...

A simple method for electron energy constancy measurement

A device is described for use in confirming the energy constancy of clinical electron beams. A wedge shaped absorber is placed over an ionization chamber leading to an energy dependent response. A measurement under the energy filter is divided by a measurement in air to correct for the inherent energy dependence of the chamber. A nearly linear response is demonstrated.

A Simple Method for Synthesis of γ-Aluminum Oxide Nanostructure Using PEG as a Neutral Surfactant

Nano-sized γ-Al2O3 was synthesized successfully by a simple method using Al2(SO4)3·18H2O as aluminium source and in the presence of polyethylene glycol (PEG 2000). FTIR spectroscopy, X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to characterize the structure and morphology of synthesized powder. The results showed that PEG playe...