A Simple Analog BLDC Drive Control for Electro-Mechanical Energy Storage System

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nonlinear energy harvesting through a multimodal electro-mechanical system

A semi-analytical method is used to illustrate the behavior of a multimodal nonlinear electromechanical system which is under base-excitation. System is considered as piezo-ceramic patches attached to a cantilever beam coupled to a resistive load. The cantilever beam is modeled as a nonlinear Timoshenko beam using Assumed Mode method and equations of motion are derived through Lagrange's equati...

متن کامل

A Control Strategy for Flywheel Energy Storage System for Frequency Stability Improvement in Islanded Microgrid

The Micro-Grid (MG) stability is a significant issue that must be maintained in all operational modes. Usually, two control strategies can be applied to MG; V/f control and PQ control strategies. MGs with V/f control strategy should have some Distributed Generators (DGs) which have fast responses versus load changes. The Flywheel Energy Storage System (FESS) has this characteristic. The FESS, w...

متن کامل

Modeling and Efficient Control of Microturbine Generation System With Battery Energy Storage for Sensitive Loads

Microturbine generation system is one of the most promising and a fast growing distributed generation sources. It is used in various applications thanks to high efficiency, quick start and high reliability. Combination of the microturbine and storage system (e.g. battery bank) is desirable selection to satisfy the load requirements under all conditions and hence the battery bank can play an imp...

متن کامل

An Improved Control Approach for Dual Mechanical Coupled BLDC Motor With Nine-Switch Inverter

This paper presents the control approach for single inverter dual coupled brushless DC motors (DCBLDC) drive system. One of the basic requirements of such systems, is the power balance between two motors and on the other hand, minimizing mechanical fluctuations in order to avoid mechanical equipment damage especially in the state of mechanical resonance. This paper also presents an improved for...

متن کامل

Speed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method

In this paper, a new method is proposed for the speed control of a three-phase current forced synchronous machine drive. This metohd is based on the use of an approximate constant commutation safety margin angle in the output thyristor bridge of the drive system as well as on the compenastion of stator magnetization reaction. The commutation process in the output converter of the machine driv...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Energy Procedia

سال: 2011

ISSN: 1876-6102

DOI: 10.1016/j.egypro.2011.10.131