A seven-junction electron pump: design, fabrication, and operation
نویسندگان
چکیده
منابع مشابه
A Strip-Type Microthrottle Pump: Modeling, Design and Fabrication
A novel design for a strip-type microthrottle pump with a rectangular actuator geometry is proposed, with more efficient chip surface consumption compared to existing micropumps with circular actuators. Due to the complex structure and operation of the proposed device, determination of detailed structural parameters is essential. Therefore, we developed an advanced, fully coupled 3D electro-flu...
متن کاملDesign, fabrication and experimental demonstration of junction surface ion traps
We present the design, fabrication and experimental implementation of surface ion traps with Y-shaped junctions. The traps are designed to minimize the pseudopotential variations in the junction region at the symmetric intersection of three linear segments. We experimentally demonstrate robust linear and junction shuttling with greater than 106 round-trip shuttles without ion loss. By minimizin...
متن کاملDesign and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer
A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...
متن کاملDESIGN AND FABRICATION OF A SOPHISTICATED VERNEUIL SYSTEM
Abstract: fabricated. Modifications carried out in different parts of the old system in order to control mostof the growth parameters with more accuracy. The fabricated system was used to grow sapphiresingle crystals with almost 10 mm in diameter and 50 mm in length. The crystallinity andstructure of the grown crystals were characterized by computer aided single crystal X-raydiffraction techniq...
متن کاملDesign and fabrication of a prototype planar undulator
The main goal of this work is to get the fabrication technology of the insertion devices. A prototype undulator with the period of 48mm and the peak magnetic field of 0.75 T has been fabricated using NdFeB-SH35 magnets based on the cooperation between ILSF and NSTRI. The total magnet length is 483 mm and the number of periods is 8. The magnetic parameters of the undulator are determined in orde...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Instrumentation and Measurement
سال: 1997
ISSN: 0018-9456
DOI: 10.1109/19.571841