A Review of Recent Developments and Advanced Applications of High-Temperature Polymer Electrolyte Membranes for PEM Fuel Cells

نویسندگان

چکیده

This review summarizes the current status, operating principles, and recent advances in high-temperature polymer electrolyte membranes (HT-PEMs), with a particular focus on developments, technical challenges, commercial prospects of HT-PEM fuel cells. A detailed most research activities has been covered by this work, major state-of-the-art concepts describing proton conductivity degradation mechanisms HT-PEMs. In addition, cell performance lifetime cells as function conditions have discussed. highlights important outcomes found literature about cell. The main objectives paper are follows: (1) latest development HT-PEMs, primarily based polybenzimidazole (2)

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Recent developments in high-temperature proton conducting polymer electrolyte membranes

Progress in the area of proton conducting polymer electrolyte membranes is intimately linked with the development of polymer electrolyte membrane fuel cells, and is today largely driven by the insufficient properties of humidified Nafion membranes at temperatures above 100 8C. Recent developments in the field include new ionomers and hybrid membranes containing inorganic nanoparticles to contro...

متن کامل

Solid polymer electrolyte membranes for fuel cell applications—a review

Fuel cells represent a clean alternative to current technologies for utilizing hydrocarbon fuel resources. Polymer electrolyte membrane fuel cells (PEMFCs) have acquired due importance as they are best suited for applications where a quick start up is required such as in automobiles. The prime requirements of fuel cell membranes are high proton conductivity, low methanol/water permeability, goo...

متن کامل

Advanced Materials in Polymer Electrolyte Fuel Cells

Polymer electrolyte fuel cells (PEFCs) have attracted much interest due to the need for an efficient, non-polluting power source with high energy density for vehicles in urban environments, as well as portable electronics [...].

متن کامل

Approaches and Recent Development of Polymer Electrolyte Membranes for Fuel Cells Operating above 100 ° C

The state-of-the-art of polymer electrolyte membrane fuel cell (PEMFC) technology is based on perfluorosulfonic acid (PFSA) polymer membranes operating at a typical temperature of 80 °C. Some of the key issues and shortcomings of the PFSA-based PEMFC technology are briefly discussed. These include water management, CO poisoning, hydrogen, reformate and methanol as fuels, cooling, and heat recov...

متن کامل

Polymer and Composite Membranes for Proton-Conducting, High-Temperature Fuel Cells: A Critical Review

Polymer fuel cells operating above 100 °C (High Temperature Polymer Electrolyte Membrane Fuel Cells, HT-PEMFCs) have gained large interest for their application to automobiles. The HT-PEMFC devices are typically made of membranes with poly(benzimidazoles), although other polymers, such as sulphonated poly(ether ether ketones) and pyridine-based materials have been reported. In this critical rev...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Energies

سال: 2021

ISSN: ['1996-1073']

DOI: https://doi.org/10.3390/en14175440