A Review of Finite Element Analysis (FEA) of Resistance Spot Welding (RSW)
نویسندگان
چکیده
منابع مشابه
Finite element simulation of laser spot welding
The present work reports on a two-dimensional axisymmetric nite element analysis of heat ow during laser spot welding, taking into account the temperature dependence of the physical properties and latent heat of transformations. An analysis based on conduction heat transfer alone, but using the ‘double ellipsoidal’ representation of the laser beam, seems to be suf cient to estimate the tra...
متن کاملNugget Formation during Resistance Spot Welding using Finite Element Model
Resistance spot welding process comprises of electric, thermal and mechanical phenomenon, which makes this process complex and highly non-linear and thus, it becomes difficult to model it. In order to obtain good weld nugget during spot welding, hit and trial welds are usually done which is very costly. Therefore the numerical simulation research has been conducted to understand the whole proce...
متن کامل3-D Finite Element Modelling of Water Jet Spot Welding
A 3-D finite element model is used to simulate water jet spot welding. The simulation is validated using the experimental data obtained by one of authors with other workers. The simulations identify parameters which correlate well with the quality of the welds produced. In particular the levels of equivalent plastic strain (PEEQ) and shear stress directions are shown to predict whether or not t...
متن کاملFinite Element Analysis of a Welding Transformer
The study introduces the detailed sequence of operations necessary to determine the selfand mutual inductances of power transformers from numerically simulated open-circuit and bucking experiments. Parameters of a welding style transformer are compared to those of a normal step-down transformer of equivalent ratings. The investigation identifies the different patterns of magnetic flux circulati...
متن کاملAnalysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation
In the present research, the effects of spot-welding process parameters on the nugget diameter and electrode penetration depth of spot-welded joints were investigated. To achieve this, a spot-welded joint of three-thin sheet low carbon steels (same thicknesses of 0.8 mm) was simulated as an electerical-thermal-mechanical coupling of 3D finite element model. After validating the finite element s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Przegląd Spawalnictwa - Welding Technology Review
سال: 2016
ISSN: 2449-7959,0033-2364
DOI: 10.26628/ps.v88i2.571