A Resistive Voltage Divider for Power Measurements
نویسندگان
چکیده
منابع مشابه
Resistive power divider for magneto-inductive waveguides
Addressing the need for passive magneto-inductive components, a lumped-element symmetric power divider has been designed and realised for a magneto-inductive cable with the resonant frequency of 95 MHz and the passband between 73 and 174 MHz. In agreement with the theory, the measured coupling loss is 6 dB for most of the passband independent of the input port. Having proved useful for magneto-...
متن کاملThe Design and Characterization of a Prototype Wideband Voltage Sensor Based on a Resistive Divider
The most important advantage of voltage dividers over traditional voltage transformers is that voltage dividers do not have an iron core with non-linear hysteresis characteristics. The voltage dividers have a linear behavior with respect to over-voltages and a flat frequency response larger frequency range. The weak point of a voltage divider is the influence of external high-voltage (HV) and e...
متن کاملA Novel Voltage Divider Circuit
A novel analog divider is described in this paper. The circuit enables the division of a dc voltage with another dc voltage. The constant of the division is dependent upon a third dc voltage and a pair of resistors. Employing a precision source for the third dc voltage and matched resistors, an acceptable level of accuracy can be obtained. Keywords-sawtooth wave; integrator; comparator; analo...
متن کاملNonlinear voltage divider
This paper is focused on how to implement a nonlinear voltage divider used in the electrical power network disturbances measurement system preconditioning circuit. The voltages acquired from the electrical power network have amplitudes between 0.2 kV and 10 kV, values which are very high for an acquisition board. These amplitudes must be reduced to the values accepted by the acquisition boards:...
متن کاملA Two-stage Inductive Voltage Divider for Coaxial Bridges
The traceability chain to derive the capacitance unit from the quantum Hall resistance coaxial bridges. These bridges employ a inductive voltage divider to provide the voltage ratio needed. One such divider has recently been constructed calibrated at Inmetro. The design techniques responsible for the small ratio errors of the device are detailed
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Energy - Energija
سال: 2020
ISSN: 1849-0751,0013-7448
DOI: 10.37798/202069132