A PROXIMITY-FED ANTENNA FOR DUAL-BAND GPS RECEIVER
نویسندگان
چکیده
منابع مشابه
Multi Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملDual Band Slotted Patch Antenna for On/Off-body Communication
Body Centric Wireless Communication (BCWC) has been topic of much research in recent years. In this manuscript, a novel low-cost microstrip patch antenna is designed for on-/off-body communication with a dual-band operation. The proposed structure exhibits a monopole-like radiation pattern at 2.45 GHz and a broadside radiation at 4.8 GHz, simultaneously. Lateral dimensions of 42 mm × 46 mm and ...
متن کاملA CPW-Fed Dual-Band Slot Antenna with Circular Polarization
In this paper, a coplanar waveguide (CPW)-fed dual-band slot antenna with circular polarization (CP) is presented. In order to achieve CP characteristic, an asymmetric slot and F-shaped end patch are introduced to a conventional rectangular slot antenna. Moreover, by cutting a T-shaped notch on the ground plane, the axial ratio (AR) bandwidth (ARBW) can be extended. The antenna shows left-hand ...
متن کاملCMOS Front-End Circuits of Dual-Band GPS Receiver
A RF front-end chip for a dual-band Global Positioning System (GPS) receiver for L1 and L2 bands is designed using 0.25 μm CMOS technology. All function blocks of the GPS front-end are integrated onto one chip. The low noise amplifier has input matching over a wide frequency range to handle the L1 and L2 bands. This receiver uses a dualband image-reject mixer with the quadrature mixer sharing a...
متن کاملReceiver for Dual Band Applications
This dual-band CMOS receiver for GSM and DCS1800 applications incorporates hardware sharing between two paths to reduce the number of off-chip components [1]. The receiver is an extension of the Weaver single-sideband architecture [2]. Utilized in References 3 and 4, the Weaver architecture performs two consecutive quadrature downconversion operations on the signal and the image such that if th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress In Electromagnetics Research C
سال: 2016
ISSN: 1937-8718
DOI: 10.2528/pierc15112002