A Proposal of Repair Procedure by Welding under Cyclic Loads
نویسندگان
چکیده
منابع مشابه
Shape optimization of reduced beam section under cyclic loads
Optimal shapes are found for reduced beam section of a cantilever H-beam subjected to forced cyclic displacement at the free end. The beam is discretized to finite elements, and a commercial software package called ABAQUS is used for elastoplastic analysis. The numerical results are first compared with experimental results to verify the accuracy. The objective function to be maximized is the di...
متن کاملAnalysis of a Beam under Moving Loads
Abstract: It is assumed that a beam made of material has a physical nonlinear behavior. This beam is analyzed under the moving concentrated and distributed continuous loads. The vibration equations of motion are derived from the Hamilton's Principle and Euler–Lagrange Equation. In this study, the amplitude of vibration, circular frequency, bending moment, stress and deflection of the beam has b...
متن کاملStudy of Energy Dissipation in Accordion Thin-Walled Tubes under Axial Cyclic Loads
Energy absorber systems like metallic dampers for controlling the structural vibrations due to earthquake have witnessed considerable development in the past few decades. Also there are some studies on the energy absorption of thin-walled tubes due to impact load. Thin-walled tubes have a large deformation capacity and are suitable energy absorbers in the structure during an earthquake provided...
متن کاملStudy of Energy Dissipation in Accordion Thin-Walled Tubes under Axial Cyclic Loads
Energy absorber systems like metallic dampers for controlling the structural vibrations due to earthquake have witnessed considerable development in the past few decades. Also there are some studies on the energy absorption of thin-walled tubes due to impact load. Thin-walled tubes have a large deformation capacity and are suitable energy absorbers in the structure during an earthquake provided...
متن کاملstudy on pullout behavior of uniaxial hdpe geogrids under monotonic and cyclic loads
abstract: this paper presents the results of pullout tests on uniaxial geogrid embedded in silica sand under monotonic and cyclic pullout forces. the new testing device as a recently developed automated pullout test device for soil-geogrid strength and deformation behavior investigation is capable of applying load/displacement controlled monotonic/cyclic forces at different rates/frequencies an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2011
ISSN: 0288-4771
DOI: 10.2207/qjjws.29.267