A prediction model for water breakthrough time in high-sulfur gas reservoir with edge water

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Enhanced Gas Recovery with Carbon Dioxide Sequestration in a Water-drive Gas Condensate Reservoir: a Case Study in a Real Gas Field

Gas reservoirs usually have high recovery due to high mobility and low residual gas saturation, although some of them producing under water-drive mechanism have low recovery efficiency. Encroachment of water into these reservoirs traps considerable amount of gas and increases the maximum residual gas saturation, which results in the reduction of gas and condensate production. Generally, the rec...

Rumen Microbial Changes Associated With High Sulfur – A Basis for Developing Treatments for Ruminant Livestock in High Sulfur Water Regions

A Stochastic Model for Water Resources Management

Irrigation water management is crucial for agricultural production and livelihood security in many regions and countries throughout the world. Over the past decades, controversial and conflictladen water-allocation issues among competing municipal, industrial and agricultural interests have raised increasing concerns. Particularly, growing population, varying natural conditions and shrinking wa...

Critical Parameters Affecting Water Alternating Gas (WAG) Injection in an Iranian Fractured Reservoir

Microscopic oil displacement of water flooding and sweep efficiency of continuous gas injection could be improved by water alternating gas (WAG) injection. The WAG injection process aims to squeeze more oil out of the reservoirs; in this method, water and gas are alternatively injected into the reservoir. Also, availability of hydrocarbon or CO2 gases in the field makes it attractive for gas-ba...