A powder metallurgy route to fabricate CNT-reinforced molybdenum-hafnium-carbon composites
نویسندگان
چکیده
منابع مشابه
Development and Characterisation of Aluminium Alloy Composites Reinforced With Multi Walled Carbon Nanotube by Powder Metallurgy Route
Light weight materials coupled to the need for cost-effective processing have combined to create a significant opportunity for aluminium powder metallurgy as its increasing interest. Aluminium alloy (AA 2219) metal matrix composite reinforced with multi walled carbon nanotube (MWCNT) produced by powder metallurgy (P/M) technique was analysed and CNTs dispersion were traced. The micro hardness a...
متن کاملManufacture of Cnt Reinforced Polymer Composites Using Nanofibers Containing Cnt
Carbon nanotubes (CNTs), discovered by Japanese scientist Sumio Iijima, have outstanding material properties such as mechanical, thermal, electrical, and magnetic properties. For example, CNTs are not only lighter than common irons, but also 100 times stronger than the irons. However, CNTs are so tiny, that is, surface area per volume is relatively large. Consequently, they tend to agglomerate....
متن کاملHigh Porosity Metallic Glass Foam: A Powder Metallurgy Route
A powder metallurgy route to the fabrication of metallic glass foam is introduced. The method involves consolidating metallic glass powder blended with blowing agent particulates to produce expandable precursors, capable of yielding foams with porosities as high as 86%. The foams are found to inherit the strength of the parent metallic glass, and to be able to deform heavily toward full densifi...
متن کاملB4C-Al Composites Fabricated by the Powder Metallurgy Process
Due to the large thermal neutron absorption cross section of 10B, B4C-Al composites have been used as neutron absorbing materials in nuclear industries, which can offer not only good neutron shielding performance but also excellent mechanical properties. The distribution of B4C particles affects the mechanical performance and efficiency of the thermal neutron absorption of the composite materia...
متن کاملCarbon Fiber Reinforced Bismaleimide Composites
Bismaleimide (BMI) resins are developed very rapidly due to the demands of the defense and aerospace industries. They are cross-linked polymers which process like epoxy resins but have an upper use temperature of 230°C, compared to the epoxy upper use temperature of 175°C. Also due to the available intrinsic properties of BMI resins such as higher thermal stability and lower toxicity than those...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2020
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2020.108635