A Plasma Electron Beam Heating Source

Pulsed Electron-Beam Heating

A pulsed, 20 kv electron beam is focussed upon a vapor-deposited thermocouple, and the resulting temperature vs. time response is studied. The experimental data show much scatter, but are consistent with the theoretical prediction that the characteristic thermal response time T is proportional to d , where d is the beam diameter at the thermocouple. From these data, for the soft-glass substrate...

A Reflex Electron Beam Discharge as a Plasma Source for Electron Beam Generation

A reflex electron beam glow discharge has been used as a plasma source for the generation of broad-area electron beams. An electron current of 120 A ( 12 A/cm2) was extracted from the plasma in 10 ps pulses and accelerated to energies greater than 1 keV in the gap between two grids. The scaling of the scheme for the generation of multikiloamp high-energy electron beams is discussed. E HAVE demo...

Low-Energy Plasma Focus Device as an Electron Beam Source

A low-energy plasma focus device was used as an electron beam source. A technique was developed to simultaneously measure the electron beam intensity and energy. The system was operated in Argon filling at an optimum pressure of 1.7 mbar. A Faraday cup was used together with an array of filtered PIN diodes. The beam-target X-rays were registered through X-ray spectrometry. Copper and lead line ...

Conceptual Design of a Sputter-type Negative Ion Source Based on Electron Cyclotron Resonance Plasma Heating

A design for a negative ion source based on electron cyclotron resonance plasma heating and ionization by surface sputtering is presented. The plasma chamber of the source is an rf-cavity designed for TE111 eigenmode at 2.45 GHz. The desired mode is excited with a loop antenna. The ionization process takes place on a cesiated surface of a biased converter electrode (cathode). The ion beam is fu...

Neutral beam heating of a RFP plasma in MST