A pH OPTODE BASED ON THYMOL BLUE: APPLICATION TO DETERMINATION OF CO2 USING FLOW INJECTION ANALY SIS SYSTEM
نویسندگان
چکیده
منابع مشابه
application of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولSpectrophotometric determination of sulfur dioxide in air, using thymol blue.
A simple and sensitive spectrophotometric method was developed for the determination of trace amounts of sulfur dioxide. The method is based on the reaction of SO2 with a known excess of ICI as the oxidant. The unreacted ICI iodinates thymol blue under acidic conditions. The lambdamax of thymol blue is at 545 nm under acidic conditions, and on lodination lambdamax shifts to 430 nm. This shift r...
متن کاملFlow-Injection Coulometric Detection Based on Ion Transfer and Its Application to the Determination of Chlorpromazine
A flow-injection coulometric method for the determination of chlorpromazine based on ion transfer into a plasticized poly(vinyl chloride) (PVC) membrane, was developed. The detector used consists of a flow-through cell that incorporates a plasticized poly(vinyl chloride) (PVC) membrane which contains tetrabutylammonium tetraphenylborate as electrolyte. The membrane is located between the flowin...
متن کاملDirect, selective flow injection spectrophotometric determination of calcium in wines using methylthymol blue and an on-line cascade dilution system
A flow-injection (FI) method is reported for the determination of calcium in wines using both offand on-line ‘cascade’ dilution FI systems. Methylthymol blue (MTB) was used as a colour agent and the absorbance of the coloured Ca–MTB complex produced was monitored at 610 nm. For both FI systems, the various chemical and physical variables were optimized and a study of interfering ions was also c...
متن کاملFlow Injection Spectrophotometric Determination of Sulphide by Catalytic Reduction of Toluidine Blue
Sulphide was determined spectrophotometrically at 628 nm and pH 6.7 based on its catalytic reduction of toluidine blue in the presence of Se(IV) using a flow injection system. After optimization of the measuring conditions the calibration curve was found linear up to 25 mg/mL and the detection limit was 0.3 mg/mL (30 mL injections). The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Eclética Química Journal
سال: 2018
ISSN: 1678-4618
DOI: 10.26850/1678-4618eqj.v35.2.2010.p33-43