A Parametric Study of Solute Redistribution During Transient Liquid Phase Diffusion Bonding Process
نویسندگان
چکیده
منابع مشابه
Transient liquid phase bonding of AISI 304L stainless steels with the austenitic and martensitic microstructures
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
متن کاملTransient liquid phase bonding of AISI 304L stainless steels with the austenitic and martensitic microstructures
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
متن کاملLow Temperature Transient Liquid Phase Bonding of Ti-6AI-4V
Transient liquid phase bonds can be made at low temperatures in vacuum using zinc inderlayers. The resulting microstructure is interface free with no detection of zinc by X-ray flourenscence, after 4 hours at 800°C The mechanical properties of the joint are at least one third of the parent metal. The process relies on evaporation, diffusion and intermetallic reaction of the zinc with the titan...
متن کاملThe effect of bonding temperature on the microstructure and mechanical properties of 939 super alloy by transient liquid phase bonding method
In this research, the effect of bonding temperature on the microstructure and mechanical properties of Inconel 939 super alloy by transient liquid phase bonding method. For this purpose, the middle layer of MBF20 with a thickness of 50 microns and three temperatures of 1060 °C, 1120 °C, 1180 °C and a time of 45 minutes have been used. In order to evaluate the microstructure, a scanning electron...
متن کاملThe effect of bonding temperature on the microstructure and mechanical properties of 939 super alloy by transient liquid phase bonding method
In this research, the effect of bonding temperature on the microstructure and mechanical properties of Inconel 939 super alloy by transient liquid phase bonding method. For this purpose, the middle layer of MBF20 with a thickness of 50 microns and three temperatures of 1060 °C, 1120 °C, 1180 °C and a time of 45 minutes have been used. In order to evaluate the microstructure, a scanning electron...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Rotating Machinery
سال: 2001
ISSN: 1023-621X
DOI: 10.1155/s1023621x01000331