A Numerical Model for Powder Densification by SPS Technique
نویسندگان
چکیده
منابع مشابه
DENSIFICATION AND MICROSTRUCTURE CHARACTERISTICS OF A PREALLOYED ALPHA BRASS POWDER PROCESSED BY LIQUID PHASE SINTERING
The rapidly solidified prealloyed alpha brass powder with a size range of 40 to 100 μm produced by water atomization process was consolidated using liquid phase sintering process. The relationships between sintering temperature, physic-mechanical properties and microstructural characteristics were investigated. Maximum densification was obtained at 930 °C, under 600 MPa compacting pressure,...
متن کاملIncreased volumetric hydrogen uptake of MOF-5 by powder densification
The metal-organic framework MOF-5 has attracted significant attention due to its ability to store large quantities of H2 by mass, up to 10 wt.% absolute at 70 bar and 77 K. On the other hand, sinceMOF-5 is typically obtained as a bulk powder, it exhibits a lowvolumetric density andpoor thermal conductivitydboth ofwhichareundesirable characteristics for ahydrogen storage material. Here we explor...
متن کاملThermodynamics of densification of powder compact
This paper established a necessary condition for the sintering of powder compacts by examining the total free energy balance in terms of the particle size, neck size and contact number. The thermodynamic analysis of the proposed model clarifies the relation of shrinkage (q) of powder compact-contact angle (f)-relative density at a given dihedral angle (fe) of a grain boundary. Faster densificat...
متن کاملFirn Densification by Grain-boundary Sliding : a First Model
Densification in highly porous, isothermal firn occurs primarily by Newtonian sliding on grain boundaries, but the coordination number increases with density and restricts further sliding. At a relative density of about 0.6 the coordination number approaches 6 and sliding ceases to be a primary mechanism of densification; the resulting decrease in densification rate causes the critical point in...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Engineering Materials
سال: 2011
ISSN: 1438-1656
DOI: 10.1002/adem.201000340