A numerical investigation of the flow structures and losses for turbulent flow in 90° elbow bends
نویسندگان
چکیده
منابع مشابه
the effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
Numerical Investigation of Turbulent Mass Transfer in a 90° Bend
This paper presents a numerical study of local mass transfer coefficients in a 90° bend using the RNG version of k–e model to include the influence of curvature on the turbulent transport. Simulations were performed for flow through a 90°, 3-D bend for Reynolds numbers of 13500, 90000, and 390000, Schmidt numbers of 2.53 and 700 and curvature ratios of 1.5, 2, and 2.5. The differences betwe...
متن کاملNumerical simulation of nanofluid flow over diamond-shaped elements in tandem in laminar and turbulent flow
In this paper, the Al2O3-water nanofluid flow in laminar and turbulent flows inside tubes fitted with diamond-shaped turbulators is numerically modeled. The nanofluid flow is modeled by employing a two-phase mixture method and applying the constant heat flux boundary condition at tube walls. In the results, the effects of different parameters such as the geometry of turbulators, volume fraction...
متن کاملeffect of sub-grid scales on large eddy simulation of particle deposition in a turbulent channel flow
چکیده ندارد.
15 صفحه اولnumerical investigation of turbulent mass transfer in a 90° bend
this paper presents a numerical study of local mass transfer coefficients in a 90° bend using the rng version of k–e model to include the influence of curvature on the turbulent transport. simulations were performed for flow through a 90°, 3-d bend for reynolds numbers of 13500, 90000, and 390000, schmidt numbers of 2.53 and 700 and curvature ratios of 1.5, 2, and 2.5. the differences between t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
سال: 2008
ISSN: 0954-4089,2041-3009
DOI: 10.1243/09544089jpme206