A novel surface micromachining process to fabricate AlN unimorph suspensions and its application for RF resonators
نویسندگان
چکیده
منابع مشابه
A novel surface micromachining process to fabricate AlN unimorph suspensions and its application for RF resonators
A novel surface micromachining process is reported for aluminum nitride (AlN) thin films to fabricate piezoelectric unimorph suspension devices for micro actuator applications. Wet anisotropic etching of AlN thin film is used with a Cr metal mask layer in the microfabrication process. Tetra methyl ammonium hydroxide (TMAH) of 25 wt.% solution is used as an etching solution for the AlN thin film...
متن کاملMontreux, Switzerland, 01-03 June 2005 FABRICATION OF SURFACE MICROMACHINED AlN PIEZOELECTRIC MICROSTRUCTURES AND ITS POTENTIAL APPLICATION TO RF RESONATORS
We report on a novel microfabrication method to fabricate aluminum nitride (AlN) piezoelectric microstructures down to 2 microns size by a surface micromachining process. Highly c-axis oriented AlN thin films are deposited between thin Cr electrodes on polysilicon structural layers by rf reactive sputtering. The top Cr layer is used both as a mask to etch the AlN thin films and as an electrode ...
متن کاملconstruction and validation of translation metacognitive strategy questionnaire and its application to translation quality
like any other learning activity, translation is a problem solving activity which involves executing parallel cognitive processes. the ability to think about these higher processes, plan, organize, monitor and evaluate the most influential executive cognitive processes is what flavell (1975) called “metacognition” which encompasses raising awareness of mental processes as well as using effectiv...
Dual-Beam Actuation of Piezoelectric AlN RF MEMS Switches Monolithically Integrated with AlN Contour-Mode Resonators
This work reports on piezoelectric Aluminum Nitride (AlN) based dual-beam RF MEMS switches that have been monolithically integrated with AlN contour-mode resonators. The dual-beam switch design presented in this paper intrinsically compensates for the residual stress in the deposited films, requires low actuation voltage (5 to 20 V), facilitates active pull-off to open the switch and exhibits f...
متن کاملMicroprocess Technology to Fabricate RF MEMS Switches, Variable Capacitors and Mechanical Resonators above Advanced LSI
This paper introduces our recent activities in R&D Center of Excellence for Integrated Microsystems toward new integrated MEMS. The most prominent difference of the new integrated MEMS from conventional ones is that MEMS is fabricated on advanced LSI with a very small design rule. Two examples of integrated MEMS technologies under development are described. The first one is singlecrystal-silico...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors and Actuators A: Physical
سال: 2006
ISSN: 0924-4247
DOI: 10.1016/j.sna.2005.09.029