A novel graded density impactor

A novel graded density impactor

Density-Graded Cellular Aluminum

Conventional metallic foam processing seeks to maximize uniformity in pore size, relative density, and other aspects of foam structure in order to minimize property variation associated with the statistical nature of foams, and thereby increase their reliability in service. However, property uniformity is in many cases an inefficient approach to meeting overall design criteria, as demonstrated ...

Next generation pharmaceutical impactor (a new impactor for pharmaceutical inhaler testing). Part I: Design.

A new cascade impactor has been designed specifically for pharmaceutical inhaler testing. This impactor, called the Next Generation Pharmaceutical Impactor (NGI), has seven stages and is intended to operate at any inlet flow rate between 30 and 100 L/min. It spans a cut size (D50) range from 0.54-microm to 11.7-microm aerodynamic diameter at 30 L/min and 0.24 microm to 6.12 microm at 100 L/min....

Mechanical properties of a density-graded replicated aluminum foam

The compressive mechanical properties of uniform and density-graded Al-6061 foams, produced by replication of polymer foams, are measured. hile the uniform foam shows compressive behavior characteristic of conventional (uniform) metallic foams with a near constant plateau stress, he density-graded foam exhibits a smoothly rising plateau stress. This behavior is modeled using a simple series com...

Flexural behavior of porous functionally graded plates using a novel higher order theory

In this paper, the flexural response of functionally graded plates with porosities is investigated using a novel higher order shear deformation theory, which considers the influence of thickness stretching. This theory fulfills the nullity conditions at the top and bottom of the plate for the transverse shear stresses, thus avoids the need of a shear correction factor. The effective material pr...