A Novel Energy Balance Control Method for a Modular Multilevel Converter in a High-Speed PMSM Drive Application
نویسندگان
چکیده
Nowadays, high-speed permanent magnet synchronous machines (HSPMSMs) are widely used in direct-drive applications. Moreover, modular multilevel converters (MMCs) have attracted a lot of attention. In this paper, the mathematical model MMC for HSPMSM was built on high- and low-speed regions, respectively, control each is completely decoupled. energy balance schemes based common mode current injection with drive applications been proposed cases, respectively. Based model, controller Simulation experiment results indicate that method an PMSM application exhibits significant performance, which can ensure eliminate circulating directly.
منابع مشابه
A Direct Power Feeding System for AC Railway Networks Using Modular Multilevel Converter
Abstract Traditional railway power supply systems impose substantial power quality problems (PQ) on the utility network, such as unbalance, harmonics and a large amount of reactive power. This paper proposes a topology based on three-phase to single-phase modular multilevel converters (MMC) to obviate these problems. The MMC based traction substations (TSS) are connected directly to the utili...
متن کاملSpeed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method
In this paper, a new method is proposed for the speed control of a three-phase current forced synchronous machine drive. This metohd is based on the use of an approximate constant commutation safety margin angle in the output thyristor bridge of the drive system as well as on the compenastion of stator magnetization reaction. The commutation process in the output converter of the machine driv...
متن کاملA HIGH SPEED CURRENT dq PI CONTROLLER FOR PMSM DRIVE
Original scientific paper A Field Programmable Gate Array (FPGA) based solution of current dq PI controller is proposed in this research, which is usually implemented in digital signal processor (DSP) based computer. The main problem in DSP based solution is the execution time, which is usually in microseconds range as well as reaching its physical limits. Therefore, completing the execution wi...
متن کاملSpeed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method
In this paper, a new method is proposed for the speed control of a three-phase current forced synchronous machine drive. This metohd is based on the use of an approximate constant commutation safety margin angle in the output thyristor bridge of the drive system as well as on the compenastion of stator magnetization reaction. The commutation process in the output converter of the machine driv...
متن کاملDesigning a novel structure of explicit model predictive control with application in a buck converter system
This paper proposes a novel structure of model predictive control algorithm for piecewise affine systems as a particular class of hybrid systems. Due to the time consuming and computational complexity of online optimization problem in MPC algorithm, the explicit form of MPC which is called Explicit MPC (EMPC) is applied in order to control of buck converter. Since the EMPC solves the optimizati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2023
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en16135022