A novel dual-layer bicomponent electrospun nanofibrous membrane for desalination by direct contact membrane distillation

Desalination by Membrane Distillation

Fabrication of Electrospun Nanofibrous Membranes for Membrane Distillation Application

Nanofibrous membranes of matrimide were successfully fabricated using electrospinning technique under optimized conditions. Nanofibrous membranes were found to be highly hydrophobic with high water contact angle of 130°. FESEM and pore size distribution analysis revealed the big pore size structure of electrospun membranes even greater than 2μm and the pore size distribution is found to be narr...

Boron removal and desalination from seawater by PVDF flat-sheet membrane through direct contact membrane distillation

a State Key Laboratory of Environmental Aquatic Chemistry, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, P.O. Box 2871, Beijing 100085, China b State Key Joint Laboratory of Environment Simulation and Pollution Control, POPs Research Center, School of Environment, Tsinghua University, Beijing 100084, China c School of Environmental and Chemical Engineering, Nancha...

Water Desalination by Membrane Distillation

Water is the most common substance in the world, however, 97% is seawater and only 3% is fresh water. The availability of water for human consumption is decreasing due to increasing the environmental pollution. According to the World Health Organisation (WHO), about 2.4 billion people do not have access to basic sanitation facilities, and more than one billion people do not have access to safe ...

Seawater Desalination for Production of Highly Pure Water Using a Hydrophobic PTFE Membrane and Direct Contact Membrane Distillation (DCMD)

Qatar’s primary source of fresh water is through seawater desalination. Amongst the major processes that are commercially available on the market, the most common large scale techniques are Multi-Stage Flash distillation (MSF), Multi Effect distillation (MED), and Reverse Osmosis (RO). Although commonly used, these three processes are highly expensive down to high energy input requirements and ...