A novel auxiliary-free zero inductor current detection scheme for step down non-isolated LED driver
نویسندگان
چکیده
منابع مشابه
An Isolated Off-Line High Power Factor Electrolytic Capacitor-Less LED Driver with Pulsating Output Current
One of the most efficient lighting technology is based on light-emitting diodes (LEDs). Common LED drivers with AC-input (50-60Hz) usually require a bulk electrolytic capacitor to decrease low-frequency ripple in the output. However, the critical element that limits the lifespan of the LED driver is the electrolytic capacitor. An isolated off-line LED driver is proposed in this paper, in which ...
متن کاملNovel Zero-Voltage and Zero-Current-Switching Full-Bridge PWM Converter Using a Simple Auxiliary Circuit
A novel zero-voltage and zero-current-switching (ZVZCS) full-bridge pulsewidth modulation converter is presented to simplify the circuits of the previously presented ZVSCS converters. A simple auxiliary circuit, which consists of one small capacitor and two small diodes, is added in the secondary to provides ZVZCS conditions to primary switches, as well as to clamp secondary rectifier voltage. ...
متن کاملOverstress-Free Charge Pump White LED Driver
This paper presented a white light emitting diode (LED) driver that utilized charge pump in boosting the input voltage. The output voltage had been made sure that it was sufficient enough to overcome the forward voltage of the LED as well as provide voltage headroom for the transistors in every LED channel branch. The charge pump and its peripheral circuit, the clock booster circuit, do not suf...
متن کاملSingle-Stage Coupled-Inductor Sepic-Type HB-LED Driver with Soft Switching for Universal Line Input
This paper proposes a single-stage Sepic-type high brightness LED driver for universal line input to perform power factor correcting and LED dimming. In the driver, a coupled inductor is introduced to replace with two separate inductors to lower volume and cost. A soft-switching cell is embedded into the driver to obtain zero-voltage switching ZVS feature so as to furthermore improve driver eff...
متن کاملA Zero-Voltage Switching Two-Inductor Boost Converter With an Auxiliary Transformer
The two-inductor boost converter with an auxiliary transformer has been previously proposed for the applications where a large difference between the input and the output voltages is required. In the isolated version of the converter implementation, however, the leakage inductance of the high frequency isolation transformer presents an adverse effect and will cause significant voltage ringing o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEICE Electronics Express
سال: 2014
ISSN: 1349-2543
DOI: 10.1587/elex.11.20141011