A Novel Approach to Analysis of Complex Crystallization Behavior in Zr-Based Bulk Metallic Glass by Non-isothermal Kinetics Studies

نویسندگان

چکیده

Abstract The complex crystallization behavior of the Zr 40 Ti 15 Cu 10 Ni Be 25 bulk metallic glass (BMG) produced by suction-casting method was studied with non-isothermal DSC measurements heating rate from 5 to K/min. Three exothermic phenomena were observed for investigated material. novel evaluation procedure qualitative and quantitative analysis intricate kinetics Zr-based BMGs is proposed. unusual deconvolution curves based on a Gaussian function two-phase exponential decay allowed separate, detailed overlapped peaks. activation energies each stage overall (Kissinger) local (Kissinger–Akahira–Sunose) procedures. KAS applied separately both low high rates showed significant difference in energies. Finally, Avrami exponent revealed that first two stages are diffusion-controlled mainly increasing nucleation rate, whereas third more growth-dominated.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Glass-Forming Ability and Early Crystallization Kinetics of Novel Cu-Zr-Al-Co Bulk Metallic Glasses

In recent years, CuZr-based bulk metallic glass (BMG) composites ductilized by a shape memory B2 CuZr phase have attracted great attention owing to their outstanding mechanical properties. However, the B2 CuZr phase for most CuZr-based glass-forming compositions is only stable at very high temperatures, leading to the uncontrollable formation of B2 crystals during quenching. In this work, by in...

متن کامل

Influences of Sample Preparation on Nanoindentation Behavior of a Zr-Based Bulk Metallic Glass

Influences of two different sample preparation methods, mechanical polishing and plunge cutting, on nanoindentation behavior of a Zr-based bulk metallic glass were studied. Mechanical polishing suppresses the serrated flow but promotes the creep. In contrast, plunge cutting promotes the serrated flow but suppresses the creep. However, hardness and elastic modulus obtained from these two methods...

متن کامل

Non-isothermal Primary Crystallization Kinetics of the Amorphous Fe85.3B11P3Cu0.7 Alloy

In the present research, the primary crystallization kinetics of the amorphous Fe85.3B11P3Cu0.7 alloy was analyzed using non-isothermal DSC measurements. The average and local activation energies, Ea, were determined by different isokinetic and isoconversional methods. The results obtained for activation energy in this research, show that due to the complexity of the primary crystallization pro...

متن کامل

EBSD Analysis for Microstructure Characterization of Zr-based Bulk Metallic Glass Composites

Bulk metallic glasses (BMG’s) have long been materials of interest due to their high strength, high elastic limit, wear and corrosion resistance, and ease of thermoforming above the glass transition temperature [1]. The primary technical challenge of implementing BMG’s in engineering applications is their tendency to fail catastrophically via highly localized shear banding events. Though the el...

متن کامل

Effect of high strain rates on peak stress in a Zr-based bulk metallic glass

The mechanical behavior of Zr41.25Ti13.75Cu12.5Ni10Be22.5 LM-1 has been extensively characterized under quasistatic loading conditions; however, its mechanical behavior under dynamic loading conditions is currently not well understood. A Split–Hopkinson pressure bar SHPB and a single-stage gas gun are employed to characterize the mechanical behavior of LM-1 in the strain-rate regime of 102–105 ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Metallurgical and Materials Transactions

سال: 2023

ISSN: ['1073-5623', '1543-1940']

DOI: https://doi.org/10.1007/s11661-023-06997-y