A novel air core electromagnetic fault current limiter with rotational motion
نویسندگان
چکیده
The authors deal with design and analysis of an air-core electromagnetic fault current limiter (FCL) rotary motion. proposed device is characterised by a simple structure, fast operating speed reversible operation. It consists two movable concentric air core spherical reactor rings (i.e. inner outer rings) variable mutual angular displacement. At normal condition, reactors are approximately aligned, subsequently, the effective inductance/impedance equipment respective voltage drop low. faulty conditions, short circuit exerts repulsive torque on reactors, which results in steady increase During this process, inductance rapidly rises up to level that effectively limits current. To determine effectiveness topology limiting network's current, profile FCL characteristic compared similar case studies (a) linear (b) without FCL. carried out via finite element (FE) supported analytical theoretical discussion. Finally, down-scale prototype was built tested verify functionality lab environment.
منابع مشابه
Series Resonance Based Fault Current Limiter with Controlling The Point of Common Coupling Voltage
This paper proposes a novel Fault Current Limiter (FCL) for the application on distribution networks to control voltage sags at the Point of Common Coupling (PCC) during faults. This new FCL is based on series resonance including resonance transformer and series capacitor. So, by proper design of the series resonance LC tank, the fault current is limited to an acceptable level. The FCL operatio...
متن کاملFinite element modeling of a superconducting fault current limiter
This paper summarizes the work done to show finite element modeling results on a high temperature superconductor fault current limiter (FCL). The paper also gives the small mock-up design of the matrix FCL and its finite element model (FEM). It also discusses the limitations of the FEM and explains how the results from the FEM compare with the experimental data derived for the configuration. A ...
متن کاملFault Current Limiter for a Distributed Power System
The up-gradation of an Electrical power generation network results in higher levels of short circuit fault current. Thereby, the existing protection equipment like circuit breakers, isolators and fuses become under capacity and not capable of withstanding higher short circuit currents. Thus the system is highly vulnerable to the adverse effects of short circuits. Replacing the whole protection ...
متن کاملStudy of Superconducting Fault Current Limiter Device in a AC Railway System
Development of the electric networks led to more interconnection in this system, therefore high level of short circuit faults flows in the networks. Many destructive damages such as instability, insulation problems and voltage mitigation can highly play unwanted influences on the system’s equipment. Using appropriate protection devices like high voltage fuses, fast switches, and such devices...
متن کاملSolid State Electronic Fault Current Limiter to Limit the Fault Current in Power System
Increase in power generation capacity of electric power systems has lead to increase in the fault current level which can exceed the maximum designed short-circuit ratings of the switchgear. All the equipment therefore must have a short-circuit rating capable to withstand this level. Short-circuit currents contain extremely high energy and can damage electrical equipment. Typically, the circuit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Iet Electric Power Applications
سال: 2023
ISSN: ['1751-8660', '1751-8679']
DOI: https://doi.org/10.1049/elp2.12309