A nonlinear viscoelastic–viscoplastic constitutive model for adhesives under creep
نویسندگان
چکیده
Abstract In this study, we consider the nonlinear viscoelastic–viscoplastic behavior of adhesive films in scarf joints. We develop a three-dimensional model, which combines viscoelastic model with viscoplastic using von Mises yield criterion and kinematic hardening. implement an iterative scheme for solution numerical algorithm stress correction combined into finite element analysis. The component is calibrated creep-recovery data from parameters are residual strains recovered creep tests varying load durations. A two-dimensional form shows good agreement joint considered work compared experiment. results show favorable experimental recovery responses two epoxy systems. also discuss contribution viscoelasticity viscoplasticity to stress/strain distribution along center lines. Viscoplasticity tends lower concentration.
منابع مشابه
A Nonlinear Creep-damage Constitutive Model of Mudstone Based on the Fractional Calculus Theory
During the flood development in an oil field, the creep characteristic of mudstone is one of the important factors causing casing damage. In this study, based on the theory of fractional order differential and taking into account the creep damage evolution rules, a fractional nonlinear creep-damage model is proposed to reflect the instantaneous deformation in loading processes and the accelerat...
متن کاملA Constitutive Model for Sands
In this paper, an elastoplastic constitutive model is presented for predicting sandy soil behavior under monotonic and cyclic loadings. The model is based on the CJS3 model that takes into account deviatoric and isotropic mechanisms of plasticity. The flow rule in deviatoric mechanism is non-associated and a kinematic hardening law controls the evolution of the 
yield surface. In the present...
متن کاملA Constitutive Model for Sands
In this paper, an elastoplastic constitutive model is presented for predicting sandy soil behavior under monotonic and cyclic loadings. The model is based on the CJS3 model that takes into account deviatoric and isotropic mechanisms of plasticity. The flow rule in deviatoric mechanism is non-associated and a kinematic hardening law controls the evolution of the yield surface. In the present s...
متن کاملA New Creep Constitutive Model for Eutectic Solder Alloy
In this study, a large number of creep tests were carried out to study the effect of stress level and testing temperature on the creep behavior of 63 Sn/37Pb solder in a systematic manner. Based on the dislocation controlled creep mechanism and Gibbs’ free-energy theory, a new creep constitutive model was proposed. The model was found to describe accurately the creep flow of the solder and to b...
متن کاملAn anisotropic tertiary creep damage constitutive model for anisotropic materials
When an anisotropic material is subject to creep conditions and a complex state of stress, an anisotropic creep damage behavior is observed. Previous research has focused on the anisotropic creep damage behavior of isotropic materials but few constitutive models have been developed for anisotropic creeping solids. This paper describes the development of a new anisotropic tertiary creep damage c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics of Time-dependent Materials
سال: 2021
ISSN: ['1573-2738', '1385-2000']
DOI: https://doi.org/10.1007/s11043-021-09506-z