A NEW TAPERED SLOT ANTENNA WITH SYMMETRICAL AND STABLE RADIATION PATTERN
نویسندگان
چکیده
منابع مشابه
Slot Antenna Fed by a Cpw Line with Tapered Transition
A tapered coplanar waveguide (CPW) transition is proposed in order to facilitate the connection between a slot antenna and coaxial connector. The broadband bow-tie slot antenna is considered as an example in this design. The tapered transition is utilized to optimize the connection of two 50 CPW lines with different widths. A narrow CPW line is connected to the slot-antenna feed point and the w...
متن کاملLinear Tapered Slot Antenna with Defected Side for Improved Gain
Linear tapered slot antennas (LTSAs) have been widely investigated as typical examples of coplanar antennas because the LTSAs offer the advantages of wide impedance bandwidth, high gain, and easy fabrication [1], [2]. However, they have high back lobes in the E-plane [3]. In general, the LTSAs are very sensitive to the thickness and the width of their supporting substrate. It is shown that radi...
متن کاملCompact UWB MIMO Ground Linearly Tapered Slot Antenna Decoupled by a Stepped Slot
A very compact ultra-wideband (UWB) multiple-input-multiple-output (MIMO) ground linearly tapered slot Antenna (LTSA) is presented in this paper. On a cost-effective FR4 substrate, it consists of a ground plane and two microstrip feedlines. Its overall dimension is only 22 × 26mm2. To miniaturize the dimension of the antenna, two linearly tapered slots on the ground plane act as the main radiat...
متن کاملImplementation of rectangular slit-inserted ultra-wideband tapered slot antenna
In this paper, a tapered slot antenna capable of ultra-wideband communication was designed. In the proposed antenna, rectangular slits were inserted to enhance the bandwidth and reduce the area of the antenna. The rectangular slit-inserted tapered slot antenna operated at a bandwidth of 8.45 GHz, and the bandwidth improved upon the basic tapered slot antenna by 4.72 GHz. The radiation pattern o...
متن کاملSmall Tapered Slot Antenna with a Band- Notched Function for Wireless Applications
A small tapered slot antenna with a notched band for wireless applications is proposed in this paper. A modified transition from microstrip to slotline is used to introduce a notched band from 4.90 to 6.34GHz. Corrugated edges on the ground is also used to improve the radiation patterns at the lower frequency band. Relatively stable radiation patterns and consistent group delay except the notch...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress In Electromagnetics Research Letters
سال: 2008
ISSN: 1937-6480
DOI: 10.2528/pierl08103003